EasyManua.ls Logo

Bosch SGS4HTI33E - Cutlery Basket Heights; Before Using for the First Time; First Time Use; Softening System

Bosch SGS4HTI33E
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NL Before first use
Cutlery basket heights
Adjust the cutlery baskets to the desired height.
Appliance height 81.5 cm with cutlery basket
position
1 max. ø
2 max. ø
3 max. ø
upper basket
22 cm
24.5 cm
27 cm
lower basket
31 cm
27.5 cm
25 cm
VV
about itfirst use
for the first use
7. Start the program with the highest
cleaning temperature without
crockery.
Vs
for the first use
count the options for the first use
in.
We recommend that you use the
appliance without any crockery
before using it for the first time due
to possible water stains and other
residues.
First time use
When using the device for the first
time or resetting it to factory
settings, you need to make settings.
Tip: You can change these settings
and other "basic settings"
Page 34
change at any time.
Required: "The device is set up and
connected."
Page 12
OO
hardening system
1. "Fill with softening salt."
Page 23
hardening system
Ohuh
hardening system
2. "Fill with rinse aid."
Page 25
ard calcareous water leaves limescale
on the dishes and the rinse aid
container and can clog parts of the
appliance. For good washing results,
you can soften water with the water
softener and softening salt. To avoid
damage to the device, water with a
hardness of more than 7 °dH must be
softened.
3. "Enable device."
Page 31
4. "Set water softening."
Page 23
5. "Set the amount of rinse aid."
Page 26
6. The "filling detergent"
Page 26
.
Overview of the water hardness settings
Here you will find an overview of the adjustable water hardness values.
You can request the water hardness from your local water company or determine it
with a water hardness tester.
Water hardness °dH
0 - 6
Hardness Range
soft
mmol/l
0 - 1.1
Set value
H00
22

Table of Contents

Related product manuals