Bosch SGV78B53UC - Filter System and Spray Arm Maintenance

Cleaning and maintenance en-us
39
¡ Make sure that there are no
aluminum items, e.g. vent hood
grease filters or aluminum
pans, in the interior of the appli-
ance.
¡ If you have not run Machine
Care after 3 wash cycles, the
indicator for Machine Care will
go out automatically.
¡ For optimal cleaning perfor-
mance, ensure the correct
placement of cleaners.
¡ Follow the safety instructions
given on the packagings of the
machine care products and ma-
chine cleaners.
1. Remove any heavy soiling in
the interior with a damp cloth.
2. Clean the filters.
3. Place the machine care product
in the appliance interior.
Only use machine care prod-
ucts specially designed for
dishwashers.
4. Pour the machine cleaner into
the detergent dispenser until it
is filled completely.
Do not place any additional ma-
chine cleaner in the appliance
interior.
5. Press ⁠.
6. Press ⁠.
a Machine Care is run.
a Once the wash cycle has
ended, the indicator for Ma-
chine Care goes out.
16.5 Filter system
The filter system removes coarse
soiling from the dishwashing cy-
cle.
1
2
3
1
Micro filter
2
Fine filter
3
Coarse filter
Cleaning filters
Soiling in the dishwashing water
may block the filters.
1. Check the filters for residue af-
ter each wash.
2. Turn the coarse filter anticlock-
wise and remove the filter
system ⁠.
‒ Make sure that no foreign
objects fall into the sump.
1
2