Tooms and Matedams Needed
TOOLS NEEDED
Hammer
\
Hob Saw
Tape Measure
Sbt Screwd river
PhHHpsScrewdriver
%20 Screwdriver
Wire Cutter Wire Stripper DrHU
LeveU
MATERIALS NEEDED
(AdditionaU materiab may be required to compUywith UocaUcodes,)
EbctrbaU SuppUyCabb ° Minimum #14 AWG, 2 conductor, 1 ground, insuUatedcopper
conductors rated 75°C or higher,
Hot Water Supply Line - Minimum 3/8" O,D, copper tubing or metal braided dishwasher
supply line,
Shut-off valve and fittings appropriate for hot water supply line (copper tubing/
compression fitting, or braided hose),
90° elbow with 3/8" N,RT, male threads on one leg, and sized to fit your water supply
line (copper tubing/compression fitting, or braided hose) on the other leg,
Teflon tape or other pipe thread compound to seal plumbing connections,
UL listed conduit connector or strain relief,
2
To Next Page
Loading...
