To Next PageTo Next Page
Need help?Do you have a question about the Bosch SHI 4302 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | SHI 4302 |
| Number of Place Settings | 12 |
| Energy Efficiency Class | A+ |
| Noise Level | 48 dB |
| Height | 81.5 cm |
| Width | 59.8 cm |
| Depth | 55 cm |
| Delay Start | Yes |
| Half Load Option | Yes |
| Wash Programs | Pre-Rinse |
Details warranty coverage and technical specifications for Bosch dishwashers.
Identifies the location of model and serial number tags on the dishwasher.
Provides a general overview of the dishwasher's design, components, and operation.
Contains supplementary notes related to Section 1.
Explains how to operate specific SHU model series of Bosch dishwashers.
Details wash cycles, sequences, durations, and consumption for SHU 30/40 series.
Outlines operating procedures for SHI and SHU 43 series Bosch dishwashers.
Provides cycle information, water usage, and duration for SHI/SHU 43 series models.
Describes how to operate SHU 53 series Bosch dishwashers.
Details wash cycles, water consumption, and duration for SHU 53 series models.
Explains the operation of SHI and SHU 68 series Bosch dishwashers.
Presents cycle details, water usage, and duration for SHI/SHU 68 series models.
Contains supplementary notes related to Section 2.
Covers the design, adjustment, and removal of dishwasher racks.
Details the internal components of the dishwasher, including spray arms, filters, and seals.
Explains the operation and components of the detergent and rinse agent dispenser.
Discusses factors affecting washability and the energy-saving drying process.
Contains supplementary notes related to Section 3.
Provides instructions for removing the outer door panel of the dishwasher.
Identifies and describes various components found within the dishwasher door assembly.
Details the operational mechanics of the detergent and rinse aid dispenser.
Outlines the procedure for removing the dispenser assembly.
Covers the removal, components, and replacement of the dishwasher's facia assembly.
Contains supplementary notes related to Section 4.
Details front-accessible base components, focusing on electrical connections and wiring.
Explains the circulation motor capacitor and its replacement.
Describes the adjustment and function of the dishwasher's leveling legs.
Covers the water inlet solenoid valve and its replacement procedure.
Provides detailed steps for removing and replacing the drain motor.
Contains supplementary notes related to Section 5.
Instructions for gaining access to the left side of the dishwasher for servicing.
Identifies key components accessible from the left side of the unit.
Explains how the water inlet and discharge systems function during operation.
Details the procedure for removing parts of the water inlet/discharge system.
Instructions for gaining access to the right side of the dishwasher for servicing.
Identifies key components accessible from the right side of the unit.
Explains the function and operation of the NTC sensor in temperature control.
Provides comprehensive steps for removing the NTC sensor.
Contains supplementary notes related to Section 7.
Detailed steps for removing the main tank of the dishwasher.
Lists components accessible after tank removal, for servicing.
Steps for removing the circulation pump and motor assembly.
Details the components of the circulation pump/motor and installation.
Instructions for removing the heater assembly.
Explains the heater assembly's function and installation process.
Describes the Aqua Sensor and its role, noting it is rarely replaced.
Covers the removal and replacement of the door springs.
Contains supplementary notes related to Section 8.
Presents detailed wiring diagrams and schematics for troubleshooting and repair.
Details diagnostic test programs, fault codes, and indicator functions for models.
