To Next PageTo Next Page
Need help?Do you have a question about the Bosch SHI6806 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | SHI6806 |
| Category | Dishwasher |
| Type | Built-in |
| Energy Efficiency Class | A++ |
| Wash Programs | 6 |
| Height | 81.5 cm |
| Depth | 55 cm |
| Control Type | Electronic |
| Rack Material | Stainless Steel |
| dBA | 44 |
| Delay Start | Yes |
| Child Lock | Yes |
| Noise Level | 44 dBA |
| Drying System | Condenser |
Explains the meaning of warning symbols used in instructions.
Lists potential hazards associated with dishwasher operation.
Provides critical safety warnings for personal injury.
Details warnings related to potential property damage.
Information on handling sensitive electronic components.
States that no CFCs or refrigerants are used.
Notes that no emissions are related to dishwashers.
Confirms no carbon monoxide emission.
States there are no government compliance issues.
Lists UL certification and Energy Star status.
Outlines electrical, water pressure, and motor specifications.
Explains the structure and changes in model numbers.
Shows where to find the model and serial number label.
Indicates where wiring and circuit diagrams are located.
Details the limited lifetime warranty coverage for Bosch dishwashers.
Refers to installation instructions for location requirements.
Refers to installation instructions for electrical needs.
Refers to installation instructions for water/drain needs.
Refers to installation instructions for removal steps.
Covers specific installation steps like leveling and door reversal.
Explains the dishwasher's cycle, heating, and drying mechanisms.
Details the function of various dishwasher components.
Explains the operation of the detergent and rinse-aid dispenser.
Describes the feature that diverts water to the top rack.
Explains the mechanism of door latches in different models.
Explains accessing the water valve by removing the toe kick.
Shows different water valve part numbers and upgrade information.
Details how to access the circulation pump by removing the outer door.
Explains accessing pumps by removing the toe kick and side panels.
Describes how to raise the tank for circulation pump access.
Provides steps for disassembling the circulation pump motor.
Details the process for reassembling the circulation pump impeller.
Explains how to remove control modules by bending tabs.
Describes disassembly for specific SHY/SHU/SHV models.
Details removing the display module for specific models.
Explains Apexx module access via the base.
Covers removing side panels for Apexx module access.
Describes raising the tank for Apexx module access.
Illustrates steps for removing the Apexx control module.
Explains how to remove the Apexx display module.
Details accessing the heater and NTC by removing the outer door.
Explains accessing heaters/NTCs by removing toe kick and side panels.
Describes separating the base from the tank for heater access.
Details pulling the base away from the tank and sump.
Provides steps for removing and installing the heater assembly.
Focuses on the removal and installation of the NTC component.
Explains how to remove and install the drain pump.
Details how to remove and install the dispensers.
Discusses condensation tube changes related to dispenser types.
Describes disassembling door latches for integrated models.
Covers the removal and reassembly of door latches.
Explains how to access the aqua sensor.
Describes how to access the water fill assembly.
Details how to enter and use test programs for various models.
Lists and explains various error codes displayed by the dishwasher.
Guides on measuring heater and NTC resistances using test programs.
Provides a table of common problems, causes, and suggested actions.
Discusses common issues related to specific dishwasher parts.
Troubleshooting steps for modules displaying a "1" error code.
A flowchart to diagnose heater circuit failures.
Addresses issues related to water leaking from dishwasher doors.
Explains how to check the PTC motor starter for circulation pumps.
Provides resistance measurements for PTC motor starters.
Discusses preventing nuisance tripping of thermal protectors.
Identifies new and original pumps and motor starters.
Guides on loosening and replacing circulation pump impellers.
Details the process for replacing circulation pump impellers.
Shows impeller ceramic ring color codes for identification.
Lists part number changes for circulation pumps in specific models.
Lists part number changes for UC/14 models with water switches.
Details changes in part numbers for circulation pumps and motors.
Explains troubleshooting heater relays on control modules.
Guides on replacing broken control module buttons with a new front cover.
Explains replacing older control modules with newer ones.
Shows pushbutton pads for newer control modules.
Compares old and new pushbutton pads.
Provides information on replacing older UC/06 model heaters.
Explains heater assemblies with motor-operated water switches.
Lists part number changes for water switch models.
Details sump improvements made to enhance drain performance.
Provides instructions for replacing damaged dispenser doors.
Explains features of top-load dispensers.
Describes the operation of top-load dispensers.
Guides on realigning misaligned dishwasher door latches.
Addresses issues with miswired door latches and potential module damage.
Notes the inclusion of larger terminal boxes with covers since Sept 2003.
Provides resistance values for modules on specific models.
Lists resistance values for modules on specific models.
Provides resistance values for modules on specific models.
Lists resistance values for modules on specific models.
Provides resistance values for modules on specific models.
Lists resistance values for modules on specific models.
Provides resistance values for modules on specific models.
Lists resistance values for modules on specific models.
Provides resistance values for modules on specific models.
Lists resistance values for modules on specific models.
Details circulation pump resistances for various models.
Provides circulation pump resistances for specific models.
