To Next PageTo Next Page
Need help?Do you have a question about the Bosch SHU66C05 and is the answer not in the manual?
General| Type | Dishwasher |
|---|---|
| Brand | Bosch |
| Model | SHU66C05 |
| Place settings | 12 |
| Energy Efficiency Class | A |
| Noise Level | 46 dB |
| Wash Cycles | 5 |
| Weight | 90 lbs |
| Control Type | Electronic |
| Rack Material | Nylon |
| Water Filtration System | Yes |
| Delay start | Yes |
| Child lock | Yes |
| Half load | Yes |
Explains the meaning of warning symbols used in the manual.
Lists potential hazards associated with dishwasher operation.
Provides critical warnings regarding personal injury risks.
Warns about potential property damage from improper use.
Discusses precautions for handling ESD-sensitive components.
States that no CFCs or refrigerants are used in dishwashers.
Clarifies that dishwashers do not produce emissions.
Confirms no carbon monoxide is emitted by dishwashers.
Notes the absence of specific government compliance issues.
Lists UL certification and Energy Star status for dishwashers.
Details electrical, water pressure, and motor specifications for the product.
Explains the model number system and lists various model series.
Illustrates where to find the model and serial number label on the dishwasher.
States the location of wiring and circuit diagrams within the manual.
Outlines limited warranty periods for various dishwasher components.
Refers to separate instructions for dishwasher placement requirements.
Refers to separate instructions for electrical connection requirements.
Refers to separate instructions for water and drain connection needs.
Refers to separate instructions for removing shipping materials.
Lists key installation steps like leveling, door reversal, and testing procedures.
Explains the dishwasher's operational cycle, heaters, and drying method.
Details the function of key components like pumps, NTC sensors, and aqua sensors.
Describes how the detergent and rinse-aid dispensers operate via a wax motor.
Explains the mechanism for the Top Rack Only feature using actuators.
Details the types and operation of door latches, including microswitches.
Explains the function and energy savings of aqua sensors in measuring water cleanliness.
Describes how water fill assemblies ensure proper dishwasher filling at various pressures.
Instructions on accessing and removing the water valve assembly from the dishwasher base.
Steps to access circulation pumps by removing panels and blocking the tank.
Procedures for removing control modules from fascia panels for various models.
Steps to access and remove heater and NTC components, often requiring base removal.
Detailed instructions for removing and installing drain pumps, accessible via toe kicks.
Procedures for removing and installing the detergent and rinse-aid dispensers.
Steps for disassembling and reassembling door latches, including microswitches.
How to access and change the aqua sensor, located at the rear of the sump.
How to access and service water fill assemblies, typically from the left side panel.
Guide on entering and running test programs for dishwasher diagnostics.
Lists and explains error fault codes displayed by the dishwasher for troubleshooting.
How to measure electrical resistances of heater and NTC components using test programs.
Table of common problems, their possible causes, and suggested actions.
Discusses common issues related to specific dishwasher parts like valves, pumps, and modules.
Troubleshooting heater relays on control modules, including visual indicators of failure.
Replacing broken front covers on control modules, saving costs over replacing the entire unit.
Replacing older control modules with #481055 and updating pushbutton pads for correct display.
Details pushbutton pad compatibility for older SHV/SHU models when replacing control modules.
Compares old and new pushbutton pad layouts for SHV/SHU models.
Procedures for replacing older UC/06 model heaters with available alternatives.
Explains water switch flow control mechanisms within heater assemblies.
Lists part changes for water switch heater assemblies and associated components.
Details sump improvements made to enhance drain pump performance.
Instructions for correctly replacing damaged or detached dispenser doors.
Information on top-load dispensers, including how rinse-aid dosage is adjusted.
Details top-load dispenser mechanisms and differences from traditional dispensers.
Steps to realign misaligned door latches to ensure proper door closure.
Troubleshooting miswired door latches and the potential for irreversible damage to control modules.
Information on terminal box cover changes made since September 2003.
How to measure module resistances for SHU43C/53A models using a multimeter.
How to measure module resistances for SHX33A/43E/46A/B and SHV46C models.
How to measure module resistances for SHU66C and SHI66A models.
How to measure module resistances for SHX56B, SHV66A, and SHY56/66 models.
How to measure module resistances for SHV99, SHX99, and SHY99 models.
How to measure module resistances for SHU/SHI43/53/68 models.
How to measure module resistances for SHU995X and SHV68 models.
How to measure module resistances for SHU88/99 and SHV43/48 models.
How to measure module resistances for SHU33/432x models.
How to measure module resistances for SHU303x/313x models.
Compares circulation pump resistances across various models for diagnostic purposes.
Provides wiring diagrams for specific dishwasher models and their components.
