Bosch SHU66C06 - Heaters & NTC’s - Removal & Installation (1)

48
VI.
VI.
Component Access/Replacement
Component Access/Replacement
Heaters &
Heaters &
NTC’s
NTC’s
–
–
Access (3)
Access (3)
To separate base from tank (1):
 Carefully lay dishwasher on its back.
 Carefully pull door springs out from base.
 Remove terminal blocks from base.
 Separate water valve from base by
removing two (2) T-20 Torx screws, then
move water valve out of the way.
Place on back Pull out door springs from base & disconnect cords
Disconnect door spring cords, then remove terminal blocks from base
HINT: Remove water
from sump and hoses
before laying dishwasher
on its back (to avoid
water entering water fill
assembly & causing
faulty water filling).
Disconnect water valve from base