Bosch SHX78B75UC - Home Connect Settings; Remote Start; Remote Diagnostics; Software Update

en-us HomeConnect™
38
1. Scan the QR code using the
HomeConnect™ app.
2. Follow the instructions in the
HomeConnect™ app.
15.2 HomeConnect™
settings
Adapt HomeConnect™ to your
needs.
You can find the HomeConnect™
settings in the basic settings for
your appliance. Which settings the
display shows will depend on
whether HomeConnect™ has
been set up and whether the ap-
pliance is connected to your home
network.
15.3 Remote Start
You can use the HomeConnect™
app to start the appliance with
your mobile device.
Tip:If you select "rc:02" in the Ba-
sic settings → Page36 of this
function, the function is perma-
nently activated, and you can start
your appliance with a mobile de-
vice at any time.
Activating Remote Start
When you have selected "rc:01" in
the basic settings of this function,
activate the function on your appli-
ance.
Requirements
¡ The appliance is connected to
your WLAN home network.
¡ The appliance is connected to
the HomeConnect™ app.
¡ "rc:01" is selected in the Basic
settings → Page36 of this func-
tion.
¡ A program is selected.
▶ Press ⁠.
If you open the appliance door,
the function is automatically de-
activated.
a button lights up.
Tip:To deactivate the function,
press ⁠.
15.4 Remote Diagnostics
The Customer Service can access
your appliance via Remote Diag-
nostics if you ask them to do so, if
your appliance is connected to the
HomeConnect™ server and if
Remote Diagnostics is available in
the country where you are using
the appliance.
Tip:Further information and de-
tails about the availability of Re-
mote Diagnostics in your country
can be found in the Service/Sup-
port section of your local website:
www.home-connect.com
15.5 Software update
You can use this function to up-
date the software of your appli-
ance, e.g. for optimization, trou-
bleshooting or safety-relevant up-
dates.
The HomeConnect™ app informs
you about available software up-
dates.