EasyManua.ls Logo

Bosch SKS50E42EU - User Manual

Bosch SKS50E42EU
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Register your
new device on
MyBosch now and
get free benefits:
bosch-home.com/
welcome
Dishwasher
SKS50E42EU
[en] User manual

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Bosch SKS50E42EU and is the answer not in the manual?

Bosch SKS50E42EU Specifications

General IconGeneral
Door colorWhite
Cord length1.75 m
Control typeRotary
Display typeLED
Product size-
Tub materialStainless steel
Built-in displayYes
Inlet hose length1.5 m
Outlet hose length2.15 m
Appliance placementFreestanding
Cutlery basket typeBosch VarioDrawer
Cutlery compartment typeBasket
Current10 A
Connected load2400 W
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
Power consumption (off)0.1 W
Water consumption per cycle8 L
Energy consumption per cycle0.61 kWh
Cycle time235 min
Noise level54 dB
Dishwashing programsEco 50°C, Glass/delicate, Intensive 70°C, Normal, Quick 45°C
Number of place settings6 place settings
Number of washing programs5
Package weight23600 g
Weight and Dimensions IconWeight and Dimensions
Depth500 mm
Width551 mm
Height450 mm
Weight21280 g
Depth with door open845 mm

Summary

Safety

General Information

Read and keep the instruction manual for future reference. Do not connect if damaged.

Intended Use

Use only for cleaning household tableware in private domestic environments up to 4000m.

Restriction on User Group

Children 8+ and those with reduced abilities may use under supervision. Keep children away.

Safe Installation

Improper installation can cause injury. Follow installation instructions carefully.

Safe Use

Follow detergent/rinse aid safety instructions to avoid harm.

Damaged Appliance

Never operate a damaged appliance. Call customer service for repairs. Use genuine parts.

Risk to Children

Keep packaging material and small parts away from children to prevent suffocation or ingestion.

Safety Systems

Protect children from hazards. Appliance may come with a childproof lock.

Preventing Material Damage

Safe Installation

Improper installation can cause damage. Follow instructions, check clearances, and use correct hoses.

Safe Use

Escaping water vapour can damage units. Cool down before opening. Add special salt before programme.

Environmental Protection and Saving Energy

Disposing of Packaging

Packaging materials are environmentally compatible and recyclable. Sort components for disposal.

Saving Energy

Follow instructions for less electricity and water use. Use Eco 50° programme.

AquaSensor

An optical sensor measures water turbidity to save water and adjust temperature/time.

Installation and Connection

Scope of Supply

Check all parts for damage and completeness upon delivery. Contact dealer or service if issues arise.

Installing and Connecting the Appliance

Position appliance in kitchen, follow safety and connection instructions, ensure level installation.

Drainage Connection

Connect appliance to drainage using wastewater hose. Ensure it's not kinked.

Drinking Water Connection

Connect appliance to a drinking water connection. Use a new water supply hose if replacing.

Electrical Connection

Connect appliance to power supply according to specifications (220-240V, 50/60Hz).

Familiarising Yourself with Your Appliance

Appliance

Overview of the parts of the appliance with a diagram and labels.

Controls

Description of the control panel buttons and their functions for configuring the appliance.

Programmes

Intensive 70°

For washing pots, pans, and non-fragile tableware with stubborn, dried-on food.

Normal 65°

For cleaning mixed dishes and cutlery with common household food remnants.

Eco 50°

Most economical programme for mixed dishes and cutlery with lightly dried-on food remnants.

Glass 40°

Gentle programme for delicate tableware, cutlery, plastics, and glasses with lightly adhering food.

Quick 45°

Time-optimised programme for delicate tableware, cutlery, plastics and glasses with lightly adhering food.

PreRinse

Cold rinsing programme for cleaning all types of dishes, suitable for intermediate cleaning.

Additional Functions

Information for Test Institutes

Information for comparability tests according to EN60436. Product number (E-Nr.) and production number (FD) are required.

VarioSpeed

Shortens running time by 20-50% but increases energy and water consumption.

Hygiene

Ensures higher hygiene status by raising and maintaining temperature for an extra-long period.

ExtraDry

Improves drying by increasing final rinse temperature and extending drying phase.

Features

Basket

Instructions on how to arrange tableware in the basket for optimal washing results.

Cutlery Basket

How to arrange cutlery in the cutlery basket with sharp points downwards.

Folding Prongs

Use folding prongs to position tableware securely, e.g., plates. Instructions on how to fold them.

Before Using for the First Time

Performing the Initial Configuration

Set up appliance by adding salt, rinse aid, special salt, and configuring water softening system.

Water Softening System

Overview of Water Hardness Settings

Table showing water hardness values, corresponding levels, and LED indicators.

Setting Water Softening System

Steps to set the water hardness level on the appliance using programme selector and Start button.

Special Salt

Instructions for adding special salt to the dispenser for water softening.

Switching Off Water Softening System

How to switch off the water softening system and salt refill indicator if not needed.

Regeneration of the Water Softening System

Explains the process of regeneration and its impact on run time and consumption.

Rinse Aid System

Rinse Aid

Instructions on how to add rinse aid to the dispenser for optimum drying results.

Setting the Amount of Rinse Aid

How to adjust the rinse aid dosage to prevent streaks or water marks on tableware.

Switching Rinse Aid System Off

How to switch off the rinse aid system and its refill indicator, e.g., with combined detergents.

Detergent

Suitable Detergents

Information on suitable detergents (tabs, powder, liquid) and recommendations for use.

Unsuitable Detergents

Warning against using hand washing-up liquid or chlorine-containing detergents.

Information on Detergents

Guidance on using organic/ecological detergents, combined detergents, and handling water-soluble pouches.

Adding Detergent

Step-by-step guide on how to open the detergent dispenser and add detergent.

Tableware

Damage to Glass and Tableware

Lists unsuitable tableware and causes of damage like caustic solutions or high temperatures.

Arrange Tableware

Tips for arranging tableware to optimize dishwashing results and prevent damage.

Removing Tableware

Warning about hot tableware causing burns. Wait for it to cool before unloading.

Basic Operation

Opening Appliance Door

Instructions on how to open the appliance door, with or without the childproof lock activated.

Switching on the Appliance

How to switch the appliance on. Eco 50° programme is default. Auto-off after 15 mins.

Setting a Programme

How to select a programme using the programme selector based on soiling level.

Setting Additional Functions

How to set additional functions to complement the selected programme.

Setting Timer Programming

How to delay the start of a programme by 3, 6, or 9 hours.

Starting the Programme

How to start the selected programme. Appliance switches off automatically after 1 minute.

Interrupting Programme

Notes on interrupting a programme, especially after heating up.

Terminate Programme

How to end a programme early or switch programmes by cancelling.

Switching off Appliance

How to switch off the appliance and turn off the water tap.

Basic Settings

Overview of Basic Settings

Lists basic settings like water hardness, rinse aid disp., and Extra Dry, and their descriptions.

Cleaning and Servicing

Cleaning the Tub

Warning about using chlorine detergents. Instructions on cleaning the tub.

Self-Cleaning Interior

The appliance self-cleans the interior. Tips for preventing odours.

Cleaning Products

Only use suitable cleaning products for the appliance.

Tips on Appliance Care

Tips to ensure the appliance functions properly, like wiping seals and control panel.

Filter System

Explains the filter system and how to clean filters for residue.

Cleaning the Spray Arm

Instructions on how to remove and clean the spray arm to remove blockages.

Troubleshooting

Appliance Door Will Not Open or Cannot Be Opened Easily

Fault: Door won't open easily. Cause: Childproof lock activated. Solution: Open door.

Display for Water Supply Lights Up

Fault: Water supply display lights up. Causes: Kinked hose, water tap off/jammed, filters blocked.

Display Check Water Supply Flashes

Fault: "Check water supply" flashes. Cause: Technical fault. Solution: Reset, check supply, contact service.

Displays Flash

Fault: Displays flash. Cause: Door not closed properly. Solution: Close door, arrange tableware.

Tableware Is Not Dry

Fault: Tableware not dry. Causes: No/low rinse aid, short drying phase, water in recesses, poor detergent, Extra Dry off.

Cutlery Is Not Dry

Fault: Cutlery not dry. Causes: Improper arrangement, blocked spray arms, soiled filters, weak programme.

Appliance Interior Still Wet After Wash Cycle

Not a fault; condensation drying. No action required.

Remnants of Food on Tableware

Fault: Food remnants. Causes: Overfilling, blocked spray arms, soiled filters, incorrect filter insertion, weak programme, intense pre-cleaning.

Water Marks on Plastic Parts

Fault: Water marks on plastic. Causes: Physics, high temp, water in recesses, low rinse aid, high water softening.

Wipeable or Water-Soluble Coatings Are Present Inside the Appliance or on the Door

Fault: Wipeable coatings. Causes: Detergent deposit, tight salt dispenser, ineffective detergent, low detergent amount, weak programme, low temp.

Stubborn White Coatings Are Present on Tableware, Inside the Appliance or the Door

Fault: Stubborn white coatings. Causes: Incorrect hardness setting, ineffective 3in1/eco detergent.

Coloured Deposits (Yellow, Orange, Brown) That Are Easy to Remove Are Present Inside the Appliance (Mainly at the Bottom)

Fault: Easy-to-remove coloured deposits. Cause: Food remnants/limescale. Check water softening, add salt.

Plastic Parts Inside the Appliance Are Discoloured

Not a fault; discolouration occurs over time and does not impair function.

Removable Streaks Are Present on Glasses, Glassware with a Metallic Appearance and Cutlery

Fault: Removable streaks. Causes: Detergent residue, blocked dispenser, pre-cleaned too intensely.

Irreversible Clouding of Glassware

Fault: Irreversible clouding. Causes: Not dishwasher-proof glasses, steam phase, low temp, incorrect softening, no glass protection.

Rust Spots on Cutlery

Fault: Rust spots. Causes: Cutlery not rust-resistant, washing with rusting items, high salt content.

Detergent Residue Is Present in the Detergent Dispenser or the Tablet Collecting Tray

Fault: Detergent residue. Causes: Blocked spray arms, damp dispenser.

Excessive Formation of Foam Occurs

Fault: Excessive foam. Causes: Hand washing-up liquid, spilled rinse aid, wrong detergent.

Special Salt Refill Indicator Lights Up

Fault: Salt indicator on. Cause: Insufficient salt or sensor issue. Add salt, avoid tablets.

Refill Indicator for Special Salt Does Not Light Up

Fault: Salt indicator off. Cause: Water softening system switched off. Set system.

Refill Indicator for Rinse Aid Lights Up

Fault: Rinse aid indicator on. Cause: Insufficient rinse aid. Add rinse aid, set dosage.

Refill Indicator for Rinse Aid Does Not Light Up

Fault: Rinse aid indicator off. Cause: Rinse aid system switched off. Set system.

Water Is Left in the Appliance at the End of the Programme

Fault: Water remaining. Causes: Blocked filters/pump, programme not ended. Clean filters/pump, wait for programme.

Appliance Cannot Be Switched On or Operated

Fault: Appliance won't switch on. Causes: Functions failed, fuse tripped, cable issue. Reset appliance.

Appliance Does Not Start

Fault: Appliance doesn't start. Causes: Door not closed, programme not ended. Close door.

Programme Starts Automatically

Cause: Did not wait for programme to end. Terminate programme.

Appliance Stops During the Programme or Cuts Out

Fault: Appliance stops. Causes: Door not closed, power/water interruption, top basket issue. Close door, check supply.

Basic Settings Cannot Be Changed

Cannot change basic settings during a running programme.

Appliance Door Cannot Be Closed

Fault: Door won't close. Causes: Door lock activated, installation issue, items blocking. Close with force, check installation.

Lid on the Detergent Dispenser Cannot Be Closed

Fault: Lid won't close. Cause: Blocked by detergent residue. Remove residue.

Filling Valves Making Knocking Noises

Not an appliance fault; caused by domestic installation.

Knocking or Rattling Noise

Fault: Knocking/rattling. Causes: Spray arm hitting tableware, small load. Arrange tableware, load more.

Transportation, Storage and Disposal

Removing the Appliance

Steps to disconnect and remove the appliance from its installation.

Protect Appliance from Frost

How to empty the appliance completely if there is a risk of frost.

Transporting the Appliance

Steps to prepare and transport the appliance, including running a programme to drain water.

Disposing of Old Appliance

Information on how to dispose of old appliances responsibly and safely.

Customer Service

Product Number (E-Nr.) and Production Number (FD)

How to find the product and production numbers required for customer service.

Technical Specifications

Related product manuals