en HomeConnect
36
To be able to use HomeConnect,
you must first set up the connection
to the WLAN home network (Wi-Fi
1
)
and to the HomeConnect app.
¡ →"Connecting the appliance to
WLAN home network (Wi-Fi)",
Page36
The HomeConnect app guides you
through the entire login process. Fol-
low the instructions in the HomeCon-
nect app to configure the settings.
Tips
¡ Please consult the documents sup-
plied by HomeConnect.
¡ Please also follow the instructions
in the HomeConnect app.
Note:Please note the safety precau-
tions in this instruction manual and
make sure that they are also ob-
served when operating the appliance
via the HomeConnect app.
→"Safety", Page4
HomeConnect quick start
Connect your appliance to a mobile
device quickly and easily.
Installing app
1. Install the HomeConnect app on
your mobile device.
2. Start the HomeConnect app and
set up access for HomeConnect.
The HomeConnect app guides
you through the entire login pro-
cess.
Connecting the appliance to WLAN
home network (Wi-Fi)
Requirements
¡ The HomeConnect app is installed
on your mobile device.
¡ Wi-Fi is activated on the router.
¡ The appliance receives signals
from the WLAN home network (Wi-
Fi) at its installation location.
¡ The appliance door is closed.
1. With the help of the HomeConnect
app scan the QR code.
2. Follow the instructions in the
HomeConnect app.
HomeConnect settings
Adapt HomeConnect to your needs.
You can find the HomeConnect set-
tings in the basic settings for your ap-
pliance. Which settings the display
shows will depend on whether
HomeConnect has been set up and
whether the appliance is connected
to your home network.
Remote Start
You can use the HomeConnect app
to start the appliance with your mo-
bile device.
Tip:If you select "rc2" in the "Basic
settings" →Page35 of this function,
the function is permanently activated
and you can start your appliance with
a mobile device at any time.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
To Next Page
Loading...
Need help?
General
