Bosch SMI2ITB33E User Manual

en Troubleshooting
48
Fault Cause Troubleshooting
Stubborn white coatings are
present on tableware, inside
the appliance or the door.
Too little detergent is being
used.
▶ Increase the amount of detergent
used or change "Detergent "
→Page27.
Washing programme selec-
ted too weak.
▶ Select a more intensive washing
programme.
→"Programmes", Page18
Tea residue or lipstick marks
on tableware.
Washing temperature is too
low.
▶ Select a programme with a higher
washing temperature.
→"Programmes", Page18
Too little detergent is being
used or is unsuitable.
▶ Use a suitable "Detergent "
→Page27 and follow the manufac-
turer's instructions for the amount
to be used.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
▶ Only remove large remnants of food
and do not prerinse tableware.
Coloured coatings (blue, yel-
low, brown) that are difficult
or impossible to remove are
present inside the appliance
or on stainless steel table-
ware.
The formation of films is due
to substances contained in
vegetables (cabbage, celery,
potatoes, noodles, etc.) or
tap water (manganese).
▶ Clean the appliance.
You can remove deposits with
"Mechanical cleaning" →Page38
or a machine cleaning product. It
may not always be possible to com-
pletely remove deposits but they
are harmless to health.
The formation of films is due
to metal components on sil-
ver or aluminium tableware.
▶ Clean the appliance.
You can remove deposits with
"Mechanical cleaning" →Page38
or a machine cleaning product. It
may not always be possible to com-
pletely remove deposits but they
are harmless to health.

Bosch SMI2ITB33E Specifications

General

Brand	Bosch
Model	SMI2ITB33E
Category	Dishwasher
Language	English