Bosch SMS46NW01B - 12 Rinse Aid System; Rinse Aid; Setting the Amount of Rinse Aid

en Rinse aid system
28
1. Press ⁠.
2. Hold programme button A and
press repeatedly until the dis-
play shows H:xx.
3. Release programme button A and
⁠.
a Programme button A flashes and
the display shows H:04.
4. Press programme button C re-
peatedly until the display shows
H:00.
5. Press to save the setting.
a The water softening system is
switched off and the salt refill indic-
ator is deactivated.
Rinse aid system
12 Rinse aid system
Rinse aid system
You can use the rinse aid system
and rinse aid to get tableware and
glasses rinsed perfectly without
marks.
12.1 Rinse aid
For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
Adding rinse aid
If the rinse aid refill indicator lights
up, top up with rinse aid. Only use
rinse aid for domestic dishwashers.
1. Press the catch on the lid of the
dispenser for rinse aid and lift
⁠.
1
2
2. Add rinse aid up to the max mark.
max
3. If rinse aid spills out, remove it
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the wash
cycle.
4. Close the lid of the dispenser for
rinse aid.
a The lid clicks into position.
12.2 Setting the amount of
rinse aid
If there are streaks or water marks on
tableware, change the amount of
rinse aid.
1. Press ⁠.
2. Hold programme button A and
press repeatedly until the dis-
play shows H:xx.