Basic operation en
35
15.2 Switching on the appli-
ance
▶ Press .
The Eco 50° programme is set by
default.
If you do not perform any actions
on the appliance for 15 minutes,
the appliance will automatically
switch off.
1
15.3 Setting a programme
To adjust the washing programme to
the soiling level of the tableware, se-
lect a suitable programme.
▶ Press the right programme button.
→"Programmes", Page19
a The remaining running time of the
programme appears on the dis-
play.
15.4 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note:The additional functions which
can be used depend on the pro-
gramme selected.
→"Programmes", Page19
▶ Press the button for the relevant
additional function.
→"Additional functions", Page21
a The additional function is set and
the additional function button
flashes.
15.5 Setting timer program-
ming
You can delay the start of the pro-
gramme by up to 24hours.
1. Press .
a "h:01" appears in the display.
2. Use or to set the required
start time for the programme.
3. Press .
a This activates timer programming.
Tip:To deactivate timer program-
ming, press or repeatedly until
"h:00" appears in the display.
15.6 Starting the programme
▶ Press .
a The programme has ended when
the display shows "0:00".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→"Terminate programme",
Page36
¡ You can use the setting Auto
Power Off to activate or deactivate
automatic switch-off of the appli-
ance at the end of the
programme.
1
→"Overview of basic settings",
Page37
1
Depending on the appliance specifications