Bosch SMV41D10EU - Page 38

en Troubleshooting
38
Fault Cause and troubleshooting
Display for water sup-
ply lights up
10.Restore the power supply.
11.Switch the appliance on.
Filters are soiled or blocked.
▶ Clean the filters.
→"Cleaning filters", Page35
Not an appliance fault. Siphon connection is still
closed or the wastewater hose is kinked or blocked.
1. Check the connection to the siphon and open if ne-
cessary.
2. Install wastewater hose without kinks.
3. Remove residues.
Not an appliance fault. Wastewater pump is blocked
or the cover of the wastewater pump is loose.
1. Clean the wastewater pump.
→"Clean wastewater pump", Page48
2. Secure the cover of the wastewater pump so it
clicks into position.
→"Clean wastewater pump", Page48