Bosch SMV8ZCX02E - Page 47

Troubleshooting en
47
Fault Cause Troubleshooting
E:3200 or indicator for wa-
ter supply lights up.
The filters in the water con-
nection of the supply or
AquaStop hose are blocked.
1. Switch off the appliance.
2. Pull out the mains plug.
3. Turn off the water tap.
4. Unscrew the water connection.
5. Remove the filter from the supply
hose
6. Clean the filter.
7. Re-insert the filter in the supply
hose.
8. Screw the water connection back
on.
9. Check the water connection for
leaks.
10. Restore the power supply.
11. Switch the appliance on.
E:9240 lights up. Filters are soiled or blocked.
▶
Clean the filters.
→"Cleaning filters", Page44
E:6103 lights up. Water is
not drained.
Wastewater hose is blocked
or kinked.
1. Reposition the wastewater hose
without kinks.
2. Remove residues.
Siphon connection is still
sealed.
▶
Check the connection to the siphon
and open if necessary.
Cover of the wastewater
pump is loose.
▶
Secure the cover of the "Wastewa-
ter pump " →Page58 so it clicks
into position.
E:6102 lights up. Wastewater pump is
blocked.
▶
Clean the wastewater pump.
→"Clean wastewater pump",
Page58
Cover of the wastewater
pump is loose
▶
Secure the cover of the "Wastewa-
ter pump " →Page58 so it clicks
into position.