Do you have a question about the Bosch SMV8ZCX07E and is the answer not in the manual?
Door color | Not applicable |
---|---|
Cord length | 1.75 m |
Control type | Touch |
Display type | TFT |
Product size | Full size (60 cm) |
Tub material | Stainless steel |
Certification | CE, VDE |
Built-in display | Yes |
Inlet hose length | 1.65 m |
Custom panel-ready | No |
Outlet hose length | 1.9 m |
Appliance placement | Fully built-in |
Control panel color | Gray |
Cutlery basket type | Bosch VarioDrawer Pro |
Cutlery compartment type | Drawer |
Current | 10 A |
Connected load | 2400 W |
AC input voltage | 220 - 240 V |
AC input frequency | 50 - 60 Hz |
Energy efficiency scale | A to G |
Water consumption per cycle | 9.5 L |
Energy consumption per cycle | 0.747 kWh |
Cycle time | 235 min |
Noise level | 41 dB |
Drying system | Zeolite |
Delay start (max) | 24 h |
Overflow protection | - |
Dishwashing programs | Auto 45-65°C, Eco 50°C, Express, Glass/delicate, Hygiene, Intensive 70°C, Pre-wash, Silent |
Number of place settings | 14 place settings |
Number of washing programs | 8 |
Maximum water flow pressure | 1000 kPa |
Minimum water flow pressure | 50 kPa |
Apps supported | Bosch Home Connect |
Feet adjustment | 60 mm |
Package weight | 54500 g |
Depth | 550 mm |
---|---|
Width | 598 mm |
Height | 815 mm |
Weight | 52200 g |
Depth with door open | 1150 mm |
Installation compartment width | 600 mm |
Installation compartment height | 875 mm |
Read manual, intended use, user restrictions, safe handling, and product information.
Precautions for safe installation, power connection, earthing, and preventing electric shock.
Risks of shock, fire, explosion, injury, scalding, and burns during operation.
Precautions regarding children, suffocation, crushing, harm, chemical burns, and injury.
Instructions for drainage, drinking water, and electrical connections.
Setting water hardness, rinse aid, and other basic settings before first use.
Overview of wash programmes and special features like Zeolith drying and Extra Clean Zone.
Switching on, setting programmes, timer programming, starting, and interrupting cycles.
Connecting to Wi-Fi, app control, remote start, and diagnostics.
Routine cleaning of filters, spray arms, tub, and using the Machine Care programme.
Identifying and resolving error codes, washing results, and appliance malfunctions.
Key technical data including weight, voltage, power, water pressure, and capacity.