EasyManua.ls Logo

Bosch SPE53C55UC - Switching on the Appliance; Setting a Cycle; Setting Options; Setting the Electronic Delay Time

Bosch SPE53C55UC
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en-us Basic Operation
26
After starting the appliance, the
door has to be closed within 4
seconds, otherwise the operation
will be paused. If this occurs, fol-
low the steps below to restart your
dishwasher.
1. For top button controls: Press
and close the door.
2. For front button controls: Close
the door and press ⁠.
a The wash cycle will resume.
Notes
¡ Unintentional operation is
activated when:
Pressing Start to begin a
wash cycle
Setting Delay time and
pressing Start
Opening the door while De-
lay time is active
Opening the door during a
wash cycle.
¡ This feature cannot be deacti-
vated.
12.2 Switching on the
appliance
Touch with a short 1
second touch.
The standard cycle is set by
default.
The buttons on the appliance
are touch sensitive and only re-
quire a quick, gentle touch.
If you do not perform any ac-
tions on the appliance for 10
minutes, it will automatically
switch off.
12.3 Setting a cycle
To adjust the wash cycle to the
soiling level of the dishware, se-
lect a suitable program.
Press the right cycle button.
a The cycle is set and the cycle
button flashes.
a The remaining run time of the
cycle appears on the display.
12.4 Setting options
You can set options to complete
the chosen wash program.
Note:The available options de-
pend on which program is se-
lected.
Press the button for the rele-
vant option.
a The option is set and the option
button flashes.
12.5 Setting the electronic
delay time
You can delay the start of the
wash cycle by up to 24hours.
1. Press ⁠.
a "h:01" appears on the display.
2. Use to set the required
start time for the wash cycle.
3. Press ⁠.
a This activates the electronic de-
lay time.
Tip:To deactivate the electronic
delay time, press repeatedly
until "h:00" appears on the dis-
play.
12.6 Starting the wash
cycle
Press .
a The wash cycle has ended
when the display shows
"0h:00m".
Notes
¡ If you want to add more dish-
ware while the appliance is run-
ning, do not use the collecting
tray as a handle for the upper
rack. You might touch the par-
tially dissolved tablet.

Table of Contents

Related product manuals