To Next PageTo Next Page
Need help?Do you have a question about the Bosch SPV40C10GB and is the answer not in the manual?
This document outlines the operating instructions for a Bosch SPV40C10GB dishwasher, a household appliance designed to clean dishes and utensils efficiently. The manual covers basic functions, usage features, and procedures for starting, interrupting, and terminating wash cycles.
The Bosch SPV40C10GB dishwasher is equipped with a control panel that allows users to select and manage various washing programs. Key functions include an ON/OFF switch, a timer programming feature for delayed starts, and additional options to customize wash cycles. The appliance provides visual feedback through a cleaning display and a dry display, indicating the current status of the wash cycle. It also features indicators for salt refill and rinse aid refill, ensuring optimal performance and cleanliness. A "Check water supply" display alerts the user to potential issues with water intake. The dishwasher is designed to automatically run a selected program and signal its completion both visually and acoustically.
To begin a wash cycle, the user first switches on the appliance using the ON/OFF switch. Next, they select the desired program from the available options. The digital display will then show the estimated duration of the chosen program, which will flash to indicate readiness. Finally, pressing the START button initiates the program.
The dishwasher clearly indicates the end of a program. The numerical display will show "0:00," and both the cleaning display and the dry display will turn off. An acoustic signal also confirms that the program has concluded. For safety and optimal drying, it is recommended to fully open the dishwasher door at the end of the program, rather than partially, and to wait for the utensils to cool down before removing them. This practice helps prevent steam buildup and ensures better drying results.
Should the user need to pause a running program, they can do so by switching off the ON/OFF switch. This action causes all LEDs to turn off, and the current program settings are saved. If the dishwasher is connected to a warm water supply or is currently heating, it is crucial to exercise caution when opening the door. In such cases, the door should be left ajar for several minutes before being fully closed. This precaution helps to release any built-up pressure (expansion) and prevents the door from springing open unexpectedly or water from spilling out. To resume the program, the user simply switches the ON/OFF switch back on.
If a user wishes to completely stop and reset a program, they can follow a specific procedure. First, the door must be opened. Then, the START button [9] should be pressed and held for approximately 3 seconds until all displays turn off. After this, the door can be closed. The dishwasher will then proceed to drain any residual water, a process that typically takes about 1 minute. This feature is useful for canceling a program mid-cycle, for instance, if an item was forgotten or if the wrong program was selected.
The control panel is intuitively designed with clearly labeled buttons and indicators. Buttons such as "<" and ">" allow for navigation through program options or settings. The START button is prominently placed for easy program initiation. The various displays provide real-time information, making it straightforward for users to monitor the appliance's operation. The inclusion of refill indicators for salt and rinse aid helps users maintain the dishwasher's performance by prompting them to replenish these essential consumables when needed. The "Check water supply" indicator serves as a diagnostic tool, alerting users to potential issues that might affect the wash cycle, such as low water pressure or a blocked inlet.
Overall, the Bosch SPV40C10GB dishwasher is designed for user-friendly operation, offering clear instructions for managing wash cycles from start to finish, with provisions for interruptions and resets to accommodate various user needs. Its features aim to provide an efficient and convenient dishwashing experience.
General| Energy Efficiency Class | A+ |
|---|---|
| Noise Level | 48 dB |
| Dimensions (H x W x D) | 81.5 x 44.8 x 55 cm |
| Programs | 6 |
| Drying System | Condensation drying |
| Control panel colour | Black |
| Number of washing programs | 6 |
| AquaStop function | Yes |
| Water consumption per cycle | 9.5 L |
| Capacity | 9 Place Settings |
| Delay Start | Yes |
| Half Load Option | No |
| Appliance placement | Built-in |
| Number of Place Settings | 9 |
| Water Consumption | 9.5 L |
| Washing programs | Eco, Intensive, Quick |
| Width | 448 mm |
| Depth | 550 mm |
| Height | 815 mm |
