Why is my Bosch TASSIMO style TAS110 dripping water?
If water is dripping from the brewing unit of your Bosch Coffee Maker, it could be due to the float being stuck in the water tank. To resolve this: 1. Descale the appliance. 2. Reach into the water tank and move the float up and down to free it.
What to do if all LEDs are flashing on Bosch Coffee Maker?
If all the LEDs on your Bosch Coffee Maker are flashing, it indicates a problem with the power supply. Try the following: 1. Pull out the mains plug, wait 5 minutes, and then plug it back in.
What to do if Bosch Coffee Maker doesn't recognize T DISC?
If the T DISC barcode is not being recognized by your Bosch Coffee Maker, ensure the T DISC is correctly inserted. Also, try cleaning the T DISC reading window with a soft, damp cloth and smooth out the film of the T DISC.
How to correctly insert T DISC in Bosch TASSIMO style TAS110 Coffee Maker?
If the T DISC hasn't been correctly inserted into your Bosch Coffee Maker: 1. Insert the T DISC with the printed side facing downwards. 2. Check whether the tab of the T DISC is in the recess.
What to do if float is stuck in water tank of Bosch Coffee Maker?
If the float is stuck in the water tank of your Bosch Coffee Maker: 1. Descale the appliance. 2. Reach into the water tank and move the float up and down.
How to insert T DISC piercing unit in Bosch TASSIMO style TAS110 Coffee Maker?
If the T DISC piercing unit or T DISC holder is not correctly inserted in your Bosch Coffee Maker: 1. Press the T DISC piercing unit into the holder until it clicks audibly into place. 2. Check the position of the T DISC holder.
Overview of the different parts of the appliance with numbered labels.
Instructions for the initial setup and preparation of the appliance.
Guidance on the descaling process when the 'calc' indicator is lit.
General| Brand | Bosch |
|---|---|
| Model | TASSIMO style TAS110 Series |
| Category | Coffee Maker |
| Language | English |
To Next Page