Bosch TASSIMO style TAS110 Series - Problem with results

Troubleshooting en
35
Fault Cause troubleshooting
LED flashes.
Heavy build-up of limescale
in the appliance.
▶
Descale the appliance.
→"Descale the appliance",
Page31
LED lights up even
though decalcified water has
been used.
Decalcified water still con-
tains small amounts of lime.
▶
Descale the appliance.
→"Descale the appliance",
Page31
LED and LED are
simultaneously lit and the
brewing process is not pos-
sible.
Appliance has a fault. 1. Unplug the mains plug.
2. Contact the TASSIMO careline.
LED and LED flash
simultaneously.
Descaling process is run-
ning.
▶
Wait until the descaling process is
complete.
Problem with results
Fault Cause troubleshooting
Crema has deteriorated. Beverage outlet is soiled.
▶
Clean the beverage outlet.
→"Cleaning and servicing",
Page31
▶
Clean the brewing unit with the
TDISC.
→"Cleaning and servicing",
Page31
Build-up of limescale in the
appliance.
▶
Descale the appliance.
→"Descale the appliance",
Page31
Drink volume has changed. Build-up of limescale in the
appliance.
▶
Descale the appliance.
→"Descale the appliance",
Page31
Drink volume has reduced.
Drink dispensing halts.
Water tank has not been suf-
ficiently filled.
1. Fill the water tank with fresh, cold
water up to the mark ⁠.
2. Keep pressed until the desired
fill volume is reached.