en-us Environmental protection and energy-saving
10
During dishwashing energy is
used to heat up the washing water
and dry the mineral.
During the drying phase, moisture
from the interior of the dishwasher
is stored in the mineral and heat is
released. The heat is blown out
into the interior of the dishwasher
with dry air. This speeds up and
improves drying.
Zeolith drying therefore saves a
great deal of energy.
Note:To avoid impairing Zeolith
drying performance, do not posi-
tion dishware parts directly in front
of the intake opening or the blow
opening of the Zeolith container.
Do not position heat-sensitive
dishware parts directly in front of
the blow opening of the Zeolith
container.
→
"Appliance", Page11
3.3 AquaSensor
The AquaSensor is an optical
measuring device (light barrier)
which measures the turbidity of
the washing water. You can save
water with the AquaSensor.
The operation of the AquaSensor
depends on the selected cycle. If
the soiling level is high, the wash-
ing water is drained off and re-
placed with fresh water. If the soil-
ing level is lower, the washing wa-
ter is used in the next wash cycle,
so reducing water consumption by
3-6 liters. In the Auto cycles the
temperature and run time are ad-
ditionally adjusted to the level of
soiling.
To Next Page
Loading...
Need help?
General
