EasyManua.ls Logo

Bosch Tronic 7000 T - User Manual

Bosch Tronic 7000 T
24 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Ηλεκτρικοί θερμοσίφωνες / Εlectric water heaters
Tronic 5000 T
ES 050-1M 0 WIV-B; ES 080-1M 0 WIV-B; ES 100-1M 0 WIV-B; ES 120-1M 0 WIV-B; ES 150-1M 0 WIV-B
Tronic 7000 T
ES 080-1E 0 WIV-B; ES 100-1E 0 WIV-B
GR - Οδηγίες Εγκατάστασης
EN - Installation Instructions

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Bosch Tronic 7000 T and is the answer not in the manual?

Bosch Tronic 7000 T Specifications

General IconGeneral
Frequency50/60 Hz
Water Pressure0.2 - 10 bar
Protection ClassIP25
Energy Efficiency ClassA
TypeElectric Instant Water Heater
Temperature Range30°C - 60°C
InstallationWall-mounted

Summary

Intended Use

Technical Parameters

Description and Principle of Work

Mounting and Switching On

Mounting

Details the procedures for attaching the water heater securely to a wall, considering location and safety.

Water Heater Connection to Pipe Network

Explains how to connect the water heater to the incoming cold water and outgoing hot water pipes.

Safety Warnings for Installation

Highlights critical safety instructions related to appliance installation, including valve placement and room safety.

Rust Protection Magnesium Anode

Operation

Switch On

Guides the user on the initial steps to power on the water heater after proper connection and filling.

Electromechanical Control

Explains the operation of controls like buttons, regulators, and indicators for models with electromechanical control.

Operating Modes

Details different modes such as Anti-freeze, Summer, Winter, and Antibacterial for optimizing appliance use.

Protection According to Temperature

Models with Heat Exchanger

Important Rules

Periodic Maintenance

Instructions for Use with Electronic Control

Controlling Buttons

Identifies and explains the function of each button used for operating the electronic control panel.

Switching On; Switching Off

Describes the procedure for turning the boiler on and off using the primary control button.

Adjustment of Maximum Water Temperature

Explains how to set the desired maximum water heating temperature using the control buttons.

Work with the Anode Tester

Details how to check the magnesium anode's condition and interpret the tester's indicator lights.

Alarms

Explains the meaning of error codes (E1, E2) displayed for system faults and necessary actions.

Related product manuals