17
Maintenance
Always switch off the vacuum cleaner and pull out
the plug before performing any maintenance work.
Remove the turbo brush from the steel / telescopic
tube.
Cut off any wrapped around hair or threads
using a pair of scissors.
Then vacuum up the threads and hair using
the crevice tool.
Before the appliance is cleaned, ensure that it has been switched off and
unplugged.
Vacuum cleaners and accessories made of plastic can be cleaned using a
general commercial plastic cleaner.
Do not use scouring agents, glass or all-purpose cleaners.
Never immerse the vacuum cleaner in water!
If necessary, the dust compartment can be cleaned using another vacuum
cleaner, or simply cleaned with a dry dust cloth / dust brush.
Subject to change without notice.
To Next Page
Loading...
