FlexiDome
VF
| Installation Manual
Bosch Security Systems | 2005-11 | V1.0
EN | 20
* Only in color version of camera.
Note
If NightSense™ is active, some noise or spots may appear in the picture.
This is normal camera behavior.
If a color camera is in monochrome mode, all color related menu items are
disabled and cannot be accessed.
Color submenu*
* Only in color version of camera.
** It is only necessary to change the white point offset for special scene
conditions.
NIGHTSENSE*
AUTO
FORCED
OFF
Nightsense™ extends the low-light performance
of the camera.
•In AUTO mode, the camera automatically inches
to monochrome in low-light conditions.
•In FORCED mode, the camera remains in high-
sensitivity monochrome operation.
EXIT Exit the menu
Function Selection Description
WHITE
BALANCE
ATW
AWB HOLD
•ATW: Auto tracking white balance allows the
camera to constantly adjust for optimal color
reproduction.
•AWB HOLD: Puts the ATW on hold and saves
the color settings.
RED gain** -5 - 0 - +5 Offset factory white point alignment (reducing red
introduces more cyan).
BLUE gain** -5 - 0 - +5 Offset factory white point alignment (reducing
blue introduces more yellow).
EXIT Exit the menu
To Next Page
Loading...
