Troubleshooting (continued)
Problem Possiblecause Remedialaction
"Start/Pause"indicatorlightdoesnot Faultin programsequenceor malfunction. Switchoff dryer,leavetocooldownfor 30 min,
illuminate."WrinkleBlock/Finished" switchon again.
indicatorlights. Restartprogram.
Thedisplayshows"000".
LintfilterLEDis blinkingafterthe lint Noactionrequired. Lightwill stopblinking.
filter hasbeencleaned
Displayshows.... Placelaundryondryerrack. Restartprogram.
Unusualnoise:thumpingsound
Dryeris not level.Unusualnoise:Steadyvibrationd,
rockingof the dryer
Unusualnoise:Rhythmicvibration
Waterisnotsprayedintotheunit
duringSteamcycles
Blinkingof lint filter LEDis notanindicationof a
problem.It is usedonlyas a reminder.
Laundrydetectedin drumduringwoolprogram
(laundrynoton rack)
Drumsuspensionrollersneedtimeto warmup.
Laundryballedupcausingloadto bounce.
Watertap(s)not turnedon.
Nozzledoesnotspraywateradequately.
Blockednozzle
LEDor buttonilluminatedoncontrol Faultcondition
panelwhenCycleSelectoris turnedto
"Off" position
Noactionrequired.As suspensionsystemrollers
warmupthumpingwill decreaseandshouldstop
within2 to3 minutesof dryeruse
Levelthe dryer(seeusermanualsection"Installation
Instructons"
Stopdryer,separateloaditems,restartdryer.
Turnonwatertap.
Wipethe outsideof the nozzlewitha clothmoistened
withvinegar.If thisdoesnotrestorethenozzleto
spraying,see "Blockednozzle"remedialaction
below.
Removethe nozzleusinga 7/16 inch(11 mm)socket
wrench. Placethe nozzleinto a containerfilled with
enoughwhitevinegarto coverthe nozzle.Allowthe
nozzleto soakforfive minuntes,thenscrubthe
nozzletip gentlywitha toothbrushto removeresidue.
Rinsethe nozzleandreinsertit backinto the dryer
andhandtighten,then tighten1 additionalturnwith
thewrench.
Turnoffthe circuitbreakerandcall CustomerService
(pg.32).
31
To Next Page
Loading...
