EasyManua.ls Logo

Bosch Vision 300 Series - Grounding Instructions; Electrical Grounding Requirements

Bosch Vision 300 Series
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
inappropriate objects can damage
the dryer and certain items like
cigarette lighters can pose a fire
hazard.
26. To reduce the risk of fire and
electrical shock hazards, do not
use the dryer if the power cord is
frayed or damaged, or if the plugs
are loose.
27. Do not operate the dryer if any
guards and/or panels have been
removed or if any parts are missing
or broken.
28. Do not bypass any safety devices.
29. Do not use a plastic or non-metal
flexible duct with this dryer. Plastic
or non-metal flexible duct is a
potential fire hazard.
30. Do not operate this dryer until you
are sure that the dryer has been
installed according to the
INSTALLATION INSTRUCTIONS
and that installation and electrical
grounding are in compliance with
all local regulations and/or other
applicable regulations and
requirements.
31. Failure to install, maintain and/or
operate the dryer according to
the manufacturer's instructions
may result in injury and/or
damage.
32. To avoid floor damage and mold
growth, do not let spills or
splashout to cause standing water
around or under the appliance.
33. Make sure that all water
connections to the dryer have a
shut off valve that is readily
accessible. Close the appliance
water shut-off valve(s) at the end
of each day of use.
34. Check the fill hose connections on
a regular basis to ensure that they
are tight and not leaking.
Notes:
A
B
C
The IMPORTANT
SAFEGUARDS and
WARNINGS presented in this
manual do not cover all
possible conditions that may
OCCUr.
Common sense, caution and
care must be exercised when
installing, maintaining or
operating the dryer.
Always contact your dealer,
distributor, service agent or
the manufacturer about any
problems or conditions that
you do not understand.
Follow the Safety Information
provided in the
INSTALLATION
INSTRUCTIONS and the
OPERATING
INSTRUCTIONS.
GROUNDING
INSTRUCTIONS
This appliance must be grounded. In
the event of malfunction or breakdown,
grounding will reduce the risk of electric
shock by providing a path of least
resistance for the electric current.
For CANADA
This appliance is equipped with a cord
having an equipment-grounding
conductor and a grounding plug.
The plug must be plugged into an
appropriate outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
Improper connection of the
equipment grounding conductor
can result in a risk of electric
shock.
Check with a qualified electrician
or service person if you are in
doubt as to whether the dryer is
_Doperlygrounded.
NOT modify the plug
provided with the appliance.
If it will not fit the outlet, have
a proper outlet installed by
a qualified electrician.
KEEP THESE
INSTRUCTIONS FOR
FUTURE REFERENCE.
In case of change of ownership, this
manual should be conveyed with the
dryer.
SAVE THESE
INSTRUCTIONS

Table of Contents

Related product manuals