Bosch VitaPower 4 MMB63 Series - Closing the To-Go Blender Jug; Emptying the Blender Jug; Processing Food Using the To-Go Blender Jug

Basic operation en
35
2. To add larger quantities, set the
rotary switch to ⁠.
3. Wait until the appliance stops.
4. Turn the lid in the direction and
remove it.
→Fig.
15
5. Add the ingredients.
→Fig.
15
6. Place the lid on the blender jug
again and continue to process the
ingredients.
Emptying the blender jug
Requirement:The appliance has
stopped.
1. Turn the blender jug anti-clockwise
and remove it from the base unit.
→Fig.
16
2. To pour out just a portion of the
processed food, use the spout.
‒ Open the spout.
‒ Place the processed food in a
suitable container or serve im-
mediately.
‒ Close the spout.
→Fig.
17
3. To pour out all of the processed
food, remove the lid.
→Fig.
18
Processing food using the To-
Go blender jug
1. Prepare the food.
For example, cut up large items of
food.
2. Add the food to the To-Go blender
jug.
→Fig.
19
Observe the minimum and max-
imum processing quantities.
→"Overview of recipes", Page37
3. Place the To-Go blade insert on
the To-Go blender jug.
→Fig.
19
4. Screw the To-Go blade insert and
the To-Go blender jug in tightly.
→Fig.
20
The To-Go blade insert can only be
connected to the base unit when
the To-Go blender jug is fully
screwed on.
5. Set the rotary switch to ⁠.
6. Turn the To-Go blender jug upside
down.
→Fig.
21
7. Place the To-Go blade insert on
the base unit and rotate in a clock-
wise direction until it locks into
place.
→Fig.
21
8. Set the rotary switch to the recom-
mended speed.
→Fig.
22
Tip:We recommend pausing oper-
ation several times when preparing
smaller quantities of baby food in
the To-Go blender jug.
Processing can also take place
with instantaneous switching.
→"Using instantaneous switching",
Page34
9. Process the ingredients until you
achieve the required result.
10.To end the operation, set the rotary
switch to ⁠.
→Fig.
23
Closing the To-Go blender jug
Requirement:The appliance has
stopped.
1. Turn the To-Go blender jug anti-
clockwise and remove it from the
base unit.
→Fig.
24
2. Turn the To-Go blender jug and un-
screw the To-Go blade insert.
→Fig.
24