3 4
Programme has ended when...
... ÷Start flashes and the End indicator light comes on.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Select 2Rinse/ Spin.
– Select ÷Start.
Programmes at lower temperatures:
– 2 Rinse/cSpin (deactivate =Aqua Plus button) or
select >Drain.
– Select ÷Start.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Select ÷Start. The new programme starts from the
beginning.
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load apage 7.
Observe the important information a page 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Measure accordingly:
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
Pour liquid detergent into the appropriate dispenser and place in the drum.
ä
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
L
Lć
Before washing for the first time
Wash once without any laundry a page 9.
Setting and adjusting a programme
Programme selector
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
a
L
7
/
@
2
=
>
:
c
I
Additional functions and spin
speeds a Individual settings,
page 5.
Select Start
Washing
1
2
Washing
Detergent drawer with
compartments I, II, ~
Washing machine
door
~
ʋ
ʋ
ʋ
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
ʑ
a
ʑ
a
Ĉ
a
ć
S
=
ʑ
ʑ
Ĉ
L÷
÷
÷
~
3
Drum
Control panel
Service flap
Removing the washing
Open the washing machine door and remove the washing.
If Rinse Hold (without final spin) is active: Turn the
programme selector to >Drain or select the spin speed.
Select Start.
– Remove any foreign objects -
risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models a refer to installation
instructions
Switching off
Turn the programme selector to Off.
To Next Page
Loading...
Need help?
General