This document is an instruction manual and installation guide for a Bosch washing machine.
Function Description
The Bosch washing machine is designed for private domestic use, suitable for washing machine-washable fabrics and hand-washable wool with detergent. It operates with cold mains water and standard detergents and care products suitable for washing machines. The appliance features automatic load sensing, which optimizes water consumption based on fabric type and load. It also includes an unbalanced load detection system to ensure even distribution of laundry during the spin cycle, reducing speed or stopping the spin if necessary for safety.
Important Technical Specifications
- Dimensions: 850 mm (height) x 600 mm (width) x 590 mm (depth).
- Weight: 68 - 75 kg (depending on the model).
- Mains Connection:
- Mains voltage: 220 - 240 V/50 Hz.
- Nominal current: 10 A.
- Nominal power: 2000 – 2300 W.
- Water Pressure: 100 - 1000 kPa (1 - 10 bar).
- Power Consumption:
- Switched off: 0.20 W.
- Ready for use (left-on mode): 1.90 W.
- Maximum Installation Height: Up to 4000 meters above sea level.
- Aqua-Stop Warranty: Applies to models with Aqua-Stop, providing compensation for water damage caused by a fault in the Aqua-Stop system, valid for the service life of the appliance, provided it is installed and connected correctly.
Usage Features
The washing machine offers a range of features to facilitate laundry care:
- Programme Selection: Users can select programmes using a programme selector, which also switches the machine on and off.
- Display Panel: Provides information on settings, programme duration, preset temperature, and spin speed.
- Programme Default Settings: Allows adjustment of washing temperature (from Cold to 90°C) and spin speed (up to 1400 rpm, or "Rinse Stop" for no final spin) before and during a programme.
- "Ready in" Time: Users can preselect the programme end time in increments of one hour, up to a maximum of 24 hours.
- Additional Programme Settings:
- Water Plus: Increases water level and adds an additional rinse cycle, extending washing time, suitable for very soft water or enhanced rinsing.
- Rinse Plus: Adds an additional rinse cycle for very soft water or enhanced rinsing.
- Loading Laundry: Instructions emphasize mixing laundry of varying sizes for better distribution during spinning and avoiding overfilling.
- Adding Laundry: Laundry can be added or removed after a programme has started by pressing the Start button.
- Changing/Cancelling Programmes: Programmes can be changed or cancelled by pressing the Start button, selecting a new programme, or choosing the Rinse programme to cool laundry.
- Childproof Lock: Can be activated/deactivated by pressing and holding the Start button for approximately five seconds, preventing accidental changes to settings.
- Detergent Dispensing: Features a detergent drawer with compartments for prewash detergent, main wash detergent, water softener, bleach, stain remover, and softener/starch. A measuring aid for liquid detergent is available on some models.
- Laundry Preparation: Tips include emptying pockets, removing metal items, using laundry bags for delicates, closing zips and buttons, and brushing sand from pockets/collars.
- Sorting Laundry: Guidance on sorting by fabric type, colour (washing white and coloured items separately, and new coloured items separately for the first time), and soiling level (light, normal, heavy) with recommendations for prewash and SpeedPerfect options.
- Starching: Liquid starch can be used in all wash programmes by adding it to compartment II.
- Dyeing/Bleaching: Dyeing should be done with normal household quantities, following manufacturer's instructions. Bleaching clothes in the machine is not recommended.
- Soaking: Soaking agent/detergent can be added to compartment II, with instructions for pausing and resuming the Cottons 30°C programme.
Maintenance Features
Regular maintenance is crucial for the appliance's longevity and performance:
- Machine Housing/Control Panel: Wipe with a soft, damp cloth. Avoid abrasive cloths, scourers, or cleaning agents containing solvents. Remove detergent residue immediately. Do not use a water jet.
- Drum: Wipe the rubber seal dry and leave the door open to allow the drum to dry. Use chlorine-free cleaning agents; avoid steel wool.
- Regular Cleaning: Run the Cottons 90°C programme regularly to keep the washing machine clean.
- Descaling: Descaling is generally not necessary if detergent is measured correctly. If required, follow descaling agent manufacturer's instructions.
- Detergent Drawer and Housing: Clean regularly to remove detergent or fabric softener residue. The drawer can be fully removed for cleaning, and the insert can be detached.
- Detergent Solution Pump: Instructions for clearing blockages, which involves draining hot detergent solution (after it cools down), removing the service flap, unscrewing the pump cover, cleaning the interior and impeller, and refitting the cover.
- Drain Hose at the Siphon: Instructions for clearing blockages, including switching off the appliance, loosening the hose clamp, removing and cleaning the drain hose and siphon connecting piece, then reattaching.
- Filter in the Water Supply: Instructions for cleaning the filter, which involves turning off the tap, reducing water pressure, running a short programme, switching off the appliance, disconnecting the hose, and cleaning the filter with a small brush. For AquaSecure models, the filter on the rear of the appliance also needs cleaning.
- Emergency Release: In case of a power cut, the washing machine door can be opened by pulling the emergency release downwards after draining the detergent solution and ensuring the laundry has cooled.
Need help?
To Next Page
General