EasyManua.ls Logo

Bosch WAU28PH9GB - User Manual

Bosch WAU28PH9GB
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Register your
new device on
MyBosch now and
get free benefits:
bosch-home.com/
welcome
Washing machine
WAU28PH9GB
[en] User manual and installation
instructions

Table of Contents

Other manuals for Bosch WAU28PH9GB

Questions and Answers

  • C
    courtneyscottAug 17, 2025
    Why is my Bosch WAU28PH9GB not working?
    • K
      Kathryn SimsAug 17, 2025
      Several factors could be preventing your Bosch Washer from working. Ensure the mains plug of the power cord is properly connected to the power supply and that the circuit breaker in the fuse box hasn't tripped. Also, check if there has been a power cut by verifying if other appliances are working. Make sure you have pressed the power button, the door is fully closed, the childproof lock is deactivated, no laundry is caught in the door, and the detergent drawer is pushed in as far as it can go.
  • S
    staffordstaceyAug 20, 2025
    What to do if water is leaking from the water outlet hose of my Bosch Washer?
    • A
      andreagarciaAug 20, 2025
      If water is leaking from the water outlet hose of your Bosch Washer, the hose may be damaged and needs replacement. Alternatively, the water outlet hose might not be connected correctly, so ensure it is properly connected.
  • G
    george15Aug 22, 2025
    How to stop water leaking from the inlet hose of my Bosch Washer?
    • J
      Jennifer HodgeAug 22, 2025
      If water is leaking from the water inlet hose of your Bosch Washer, the hose may not be connected correctly or securely. Connect the water supply hose correctly and tighten the screw connection.
  • R
    Roger HarrisAug 26, 2025
    Why is the Bosch WAU28PH9GB not reaching high spin speed?
    • C
      Courtney FryeAug 26, 2025
      If your Bosch Washer is not reaching the high spin speed, it may be because a low spin speed is selected; next time, set a higher spin speed. Also, ensure that you select the programmes that are suitable for the type of fabric. The unbalance load detection system may be using a reduced spin speed to eliminate an unbalance; redistribute the laundry in the drum.
  • W
    wdownsAug 28, 2025
    What to do if laundry is caught in the door of my Bosch WAU28PH9GB Washer?
    • D
      Dillon MaloneAug 28, 2025
      If laundry is caught in the door of your Bosch Washer, open the door again, remove any trapped laundry, close the door, and then press to start the programme.
  • K
    Katie BriggsAug 31, 2025
    What to do if the door of my Bosch WAU28PH9GB is not closed?
    • R
      Regina MartinezAug 31, 2025
      If the door of your Bosch Washer is not closed, close the door and then press to start the programme.
  • J
    James JohnsonSep 2, 2025
    How to fix E:36 / -10 error on Bosch WAU28PH9GB Washer?
    • K
      Katherine MooreSep 2, 2025
      The E:36 / -10 error code on your Bosch Washer indicates a problem with the drain. You should clean the drain pipe and the water outlet hose to ensure they are not blocked. Also, check that the drain pipe and water drain hose are not kinked or trapped. Ensure that the water outlet hose is installed at a maximum height of 1 metre. If you've used too much detergent, mix one tablespoon of fabric softener with 0.5 litres of water and pour the mixture into the compartment for manual dosing (not for outdoor clothing, sportswear or items stuffed with down). Remove any unapproved extensions from the water hose and ensure the pump cap is screwed in all the way, with the handle in a vertical position.
  • M
    mbrownSep 5, 2025
    Why doesn't the spin program start on my Bosch WAU28PH9GB Washer?
    • M
      Mike CooperSep 5, 2025
      If the spin programme on your Bosch Washer isn't starting, the drain pipe or water outlet hose might be blocked. Clean the drain pipe and the water outlet hose.
  • E
    Erica WilsonSep 8, 2025
    What does error E:10 / -00 / -10 / -20 mean on Bosch Washer?
    • C
      Cynthia ClarkSep 8, 2025
      The error code E:10 / -00 / -10 / -20 on your Bosch Washer indicates that the pump for the intelligent dosing system is blocked. You can try to resolve this by switching off the appliance and cleaning the pump unit. If the display appears again, call customer service.
  • D
    Dennis GutierrezSep 12, 2025
    Why does the display go out and flash on my Bosch Washer?
    • R
      Robin ThompsonSep 12, 2025
      The display on your Bosch Washer might be going out and flashing because the energy-saving mode is active. Press any button to exit this mode.

Summary

Safety Instructions

Safe Installation & Electrical Hazards

Guidelines for safe installation, electrical shock prevention, and fire risks.

Safe Usage & Health Precautions

Safe operation, avoiding electric shock, harm to health, and suffocation.

Preventing Material Damage

Installation and Connection

Connecting the Water Inlet Hose

Detailed steps for connecting the water inlet hose, including electrical safety.

Connecting to Electricity Supply

Final steps for connecting the appliance to the power supply.

Appliance Controls and Buttons

Accessories and Initial Setup

Detergents and Care Products

Detergent Dosage and Water Hardness

Guide to calculating detergent dosage based on laundry, soiling, and water hardness.

Basic Operation Guide

Programme Selection and Adjustment

Steps for switching on, setting programmes, adjusting settings, and saving favourites.

Adding Detergents and Managing Programmes

Instructions for adding detergent, starting, pausing, adding/removing laundry, and cancelling programmes.

Intelligent Dosing System

Filling and Dispenser Contents

How to fill the intelligent dosing dispensers with detergent and softener.

Adjusting Basic Dosage Settings

Guide to setting the basic dosage for the intelligent dosing system.

Cleaning and Servicing Guide

Troubleshooting Common Issues

Display Errors and Blocked Drains

Addresses display errors, blocked pipes, jammed hoses, and high water outlet connection.

Error Codes and Water Inlet Problems

Covers error codes, low water pressure, leaks, and issues with the detergent drawer or pump.

Voltage, Detergent, and Door Issues

Solutions for voltage problems, excessive detergent dosage, temperature/water errors, and door faults.

Appliance Start-up and Door Operation

Troubleshooting appliance not starting, door issues, child lock, and laundry trapped in door.

Drainage, Hose, and Leakage Problems

Addresses power failure door release, drainage issues, hose problems, and water leaks.

Spin Cycle and Drum Behaviour

Explains spin cycle variations, programme duration changes, drum movement, and vibrations.

Spin Speed and Programme Faults

Issues related to spin speed, intelligent dosing, unbalanced loads, and programme start failures.

Noise Issues and Creasing Solutions

Identifies causes of various noises and provides solutions for creasing and unsatisfactory spin results.

Spin Results and Detergent Residue

Addresses poor spin results, detergent residue, and issues with basic dosage adjustment.

Insufficient Cleaning and Connectivity

Solutions for insufficient cleaning, Home Connect malfunctions, and network connection problems.

Network Connection and Water Leaks

Resolving network connection issues, water leaks, and appliance odours.

Bosch WAU28PH9GB Specifications

General IconGeneral
TypeFreestanding
Appliance typeWashing Machine
Loading typeFront Load
Capacity9 kg
Energy Efficiency ClassA+++
Spin Speed1400 RPM
Noise Level (Wash)48 dB
Noise Level (Spin)74 dB
Width598 mm
Height848 mm
ColourWhite
Programmes15
Delay StartYes
Child LockYes
Drum MaterialStainless Steel
Spin-drying efficiency classB

Videos

How to Unlock and Master Your Bosch Serie 6 WAU28PH9GB Washing Machine: Expert Tips and Tricks

Related product manuals