Bosch WAY24549IT - Ø Programme Settings

26
Programme settings
Depending on the programme, you can use the programme
settings to adjust the washing process even more efficiently
to your items of washing.
Programme settings:
²
– are active without acknowledgement.
– not retained after appliance is switched off.
– can be selected or deselected or changed depending
on the programme progress.
Buttons Notes
Temperature
×, Ö
Before and during the programme the presettings
can be changed depending on the programme
progress.
The maximum temperature depends
on the programme and the maximum spin speed
depends on the programme and model.
Spin
×, Ö
Finished in ×, Ö
Delays the Finished in time (end of programme).
Before the programme starts, the end of the
programme can be preselected in h steps up to
maximum 24h (h = Hour).
When the programme has started, the preselected
time is displayed e.g. for 8h and counts down until
the wash programme starts. Then the programme
duration is displayed, e.g. 2:30h.
When the programme has started, the preselected
time can be changed as follows:
1. Select Avvio/Aggiungi bucato (Start/Reload)
A.
2. Select Fine fra (Finished in) button and change
Finished in time.
3. Select Avvio/Aggiungi bucato (Start/Reload)
A.
Finished in
×
To activate/deactivate the Childlock.
EcoPerfect  For saving energy. ~ Page 16
TurboPerfect  For a shorter wash time. ~ Page 16
Easy-Iron
{
Reduces creasing by special spin sequence followed
by fluffing and reduced spin speed.
². Residual moisture of the washing is slightly
increased.