Bosch WAY32890AU - Page 13

Getting to know the appliance en
13
Options button selected
and select, for example, the
Rinse Hold ($) option:
Using the buttons under the two left-
hand arrows, select the option. Using
the two right-hand arrows, select the
displayed value. The selected options
are active immediately and are
displayed on the display panel.
Wait or go back to the main menu by
pressing the Options button.
basic settings 3 sec. buttons selected
Change the appliance setting: e.g.
volume of the end signal ~ Page 36
Using the buttons under the two left-
hand arrows, select the setting. Using
the two right-hand arrows, select the
displayed value. The selection is
acknowledged by a tick.
Wait or go back to the main menu by
pressing the basic settings 3 sec.
(press and hold again).
5LQVH+ROG
  K
RQ
&
HQGVLJQDO RII