EasyManua.ls Logo

Bosch WAY32890AU - i-DOS Dispenser Customisation

Bosch WAY32890AU
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en Intelligent dosing system
34
My water hardness:
Below is an example of detergent
dosages on a packaging label:
The default setting for the basic dosage
is set specifically according to the area
in which you live (e.g. 75 ml for
detergent and 36 ml for fabric softener).
Set the basic detergent dosage
according to the detergent's packaging
label. Take your water hardness into
consideration when doing so
Select the basic fabric softener dosage
according to how soft you would like
your laundry to be.
Changing one basic dosage affects all
three dosages in the same way.
Notes
Reduce the basic dosage if using a
very concentrated detergent.
If large amounts of foam are
repeatedly created during washing,
please check your basic dosage and
dosage strength settings.
Certain types of liquid detergent can
also create excessive amounts of
foam. If your basic dosage and
dosage strength settings are correct,
we advise you to use a different
detergent.
Changing the basic dosages:
Appliance settings
~ Page 36
Dispenser content for
i-DOS i I w
Instead of fabric softener, a second
liquid detergent can be used in the
i-DOS i I w dispenser.
Notes
When switching the i-DOS i I w
dispenser content from fabric
softener to detergent, the basic
dosage for detergent is set to factory
settings for this dispenser and the
dosage for this detergent is set to
off for all programmes in which
intelligent dosing can be used. Then,
using the i-DOS i I w button on the
display panel, select the detergent
dosage (low, medium or high).
~ Page 12
The i-DOS w dispenser is
automatically deactivated if
detergent dosing is activated for the
i-DOS i I w dispenser.
The settings for this programme are
saved until they are changed.
When switching the i-DOS i I w
dispenser content to fabric softener,
the basic dosage is set to factory
settings and the dosage is set to
"normal" for all programmes in which
intelligent dosing can be used.
Switching the dispenser content
requires additional confirmation via
the display panel.
Changing the dispenser content:
Appliance settings ~ Page 36
Degree of
soiling
Water
hardness
light
normal
heavy
very heavy
soft/medium 55 ml 75 ml
120
ml
160
ml
hard/very hard 75 ml 95 ml
150
ml
180
ml

Table of Contents

Related product manuals