Bosch WIW28541EU - Malfunctions

Troubleshooting en
55
Malfunctions
Fault Cause troubleshooting
The appliance is not work-
ing.
The mains plug of the power
cord is not plugged in.
▶
Connect the appliance to the power
supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the
fuse box.
There has been a power cut.
▶
Check whether the lighting in your
kitchen or other appliances are
working.
The programme does not
start.
You have not pressedStart/
Reload .
▶
Press Start/Reload .
Door is not closed. 1. Close the door.
2. Press Start/Reload to start the
programme.
Childproof lock is activated.
▶
→"Deactivating the childproof
lock", Page45
Finishedin is activated.
▶
Check whether Finishedin is
activated.
→"Buttons", Page29
Laundry is caught in the
door.
1. Open the door again.
2. Remove any trapped laundry.
3. Close the door.
4. Press Start/Reload to start the
programme.
The door cannot beopened. ––– is activated.
▶
Continue the programme by select-
ing ⁠Spin or Drain and press-
ing Start/Reload .
→"Resuming the programme when
the programme status is Rinse
Hold", Page44
The temperature is too high.
▶
Wait until the temperature has
dropped.
▶
→"Cancelling the programme",
Page44
Water level is too high.
▶
Start the Drain programme.
Power failure.
▶
Open the door using the emergency
release.
→"Emergency release", Page61
The water is not draining. Drain pipe or water outlet
hose is blocked.
▶
Clean the drain pipe and the water
outlet hose.