en Cleaning and servicing
38
4. Pull the insert out horizontally.
5. Clean the insert under running wa-
ter and dry it off.
6. Carefully clean the fins on the heat
exchanger with a vacuum cleaner
and brush attachment.
Ensure that you vacuum the fins
from top to bottom so that they do
not become deformed or dam-
aged.
7. Carefully clean the air inlet grille
with a vacuum cleaner and brush
attachment.
In doing so, ensure that you do not
deform or damage the grille.
8. Clean the opening with a soft,
damp cloth.
9. Push the insert in horizontally until
the tab clicks into place.
10.
Close the base unit →Page39.
To Next Page
Loading...
Need help?
General
