Cleaning and servicing en
39
Closing the base unit
Requirement:The base unit is open.
→"Opening the base unit", Page36
1. Insert the heat exchanger cover by
the handle.
2. Close the lever for the heat ex-
changer.
3. Close the maintenance flap.
16.3 Water tank filter
The filter in the water tank protects
the appliance from dirt and contamin-
ants.
Cleaning the water tank filter
Check the filter regularly and clean
the filter if it is dirty.
Requirement:The condensation con-
tainer →Page33 is removed from
the appliance.
1. Pull out the filter.
2. Fit the filter.
3. Insert the condensation container
→Page34.
16.4 Moisture sensor
The moisture sensor in this appliance
measures how damp the laundry is
during the drying cycle. The appli-
To Next Page
Loading...
Need help?
General
