Bosch WQG233CBSN User Manual

en Troubleshooting
42
Fault Cause and troubleshooting
The appliance is not
working.
▶
Check whether the lighting in your kitchen or other
appliances are working.
Appliance paused, but
the drum is rotating.
Cooling process active.
▶
Not a fault – no action required.
Creasing. The load is too large.
▶
Observe the maximum load capacity of the
→"Programmes", Page26.
The laundry lies in the drum for too long after drying.
1. Remove the laundry from the drum as soon as the
drying programme has finished.
2. Spread the items of laundry for cooling.
Unsuitable programme for the type of fabric.
▶
Set the suitable programme for the type of fabric.
→"Programmes", Page26
Easy-Care fabrics are dried for too long.
▶
→"Changing the dryness level", Page25.
▶
→"Adjusting the dryness level", Page25.
Anti-Creasenot activated.
▶
Activate the Anti-Crease function.
→"Buttons", Page23
and programme ter-
minated.
Condensation tank filled.
1.
→"Emptying the condensation container", Page33.
2.
→"Inserting the condensation container", Page34.
3.
→"Starting the programme", Page30.
Water drain hose is caught or jammed.
1. Ensure that the water drain hose is not kinked or
trapped.
2. Route the water drain hose without kinks.
Water drain hose is not connected correctly.
▶
Ensure that the water drain hose is connected cor-
rectly.
→"Connecting the water drain hose", Page14
Water drain hose is blocked.
▶
Rinse the water drain hose with tap water.
Foreign object is located in the base unit
1.
→"Opening the base unit", Page36.
2. Remove the foreign objects that are present.
3.
→"Closing the base unit", Page39.

Bosch WQG233CBSN Specifications

General

Brand	Bosch
Model	WQG233CBSN
Category	Dryer
Language	English