Bosch WTB8620SZA - Optional Accessories; Technical Data; After-Sales Service; What to Do if

a
a
8
Lü +÷
¥¯³
8
a
$a
10
Technical Data
ʠ
Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable)
Weight approx. 45 kg
Max. capacity 8 kg
Condensate container 4.0 l
Connection voltage 220-240 V
Connected load 2100-2800 W
Fuse protection 16 A / 10 A
Ambient temperature 5 - 35°C
Product number Production number Inside of door
The rating plate can be found on the back of the dryer.
Power consumption when switched off 0.10 W
Power consumption when ready for use (left-on mode) 1.00 W
ʠ
Drum interior light (depending on model): The drum lights up after the door is opened and after the programme
starts, and switches off automatically.
Consumption values table (The value on the label is achieved at the maximum heat setting.)
Programme
Spin speed which
is used for spinning
the laundry
Duration** Energy consumption**
LCottons
8 kg 4 kg 8 kg 4 kg
10 A 16 A 10 A 16 A 10 A 16 A 10 A 16 A
+.÷Cupboard Dry* 1400 rpm 140 min 108 min 95 min 65 min 3.84 kWh 3.84 kWh 2.22 kWh 2.22 kWh
1000 rpm 158 min 126 min 106 min 76 min 4.61 kWh 4.61 kWh 2.59 kWh 2.59 kWh
800 rpm 176 min 144 min 117 min 87 min 5.31 kWh 5.31 kWh 3.20 kWh 3.20 kWh
|üIron Dry* 1400 rpm 116 min 86 min 86 min 56 min 2.30 kWh 2.30 kWh 1.49 kWh 1.49 kWh
1000 rpm 135 min 103 min 97 min 67 min 3.53 kWh 3.53 kWh 2.30 kwh 2.30 kwh
800 rpm 153 min 121 min 110 min 80 min 3.96 kWh 3.96 kWh 2.62 kwh 2.62 kwh
IüSynthetics 3.5 kg 3.5 kg
+.÷Cupboard Dry* 800 rpm 52 min 46 min 1.42 kWh 1.42 kWh
600 rpm 65 min 56 min 1.74 kWh 1.74 kWh
* Programme setting for testing in accordance with the applicable EN61121 standard.
** The values may differ from those specified, depending on the type of fabric, composition of laundry to be dried, residual moisture in the fabric and the
amount of laundry being loaded.
Most efficient programme for cotton fabrics
The following "standard cottons programme" (identified with ) is suitable for drying normal, wet cotton laundry and is most efficient in terms of its
combined energy consumption for drying wet cotton laundry.
Standard programme for cottons in accordance with current EU regulation 932/2012
Programme Load Energy consumption Programme duration
Cottons
Cupboard Dry
8 kg/4 kg
10 A 16 A 10 A 16 A
4.61kWh/2.59 kWh 4.61kWh/2.59 kWh 158 min/106 min 126 min/76 min
Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU.
Optional accessories (order from the after-sales service using the order number, depending on the model)
Connection fittings for condensation outlet
The condensation is conveyed directly via a hose.
Wollens basket
For drying individual wollen fabrics, sports shoes and soft toys (see separate instructions for “Woollens basket”).
WTZ
1110
WMZ
20600
11
What to do if ...
Turn the programme selector to Off and remove the mains plug from the socket.
ʠ
The $Start/Pause indicator light
does not light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
The display panel light and
indicator lights (depending on
model) go out and the $Start/
Pause indicator light flashes.
Energy-saving mode is activated a see the separate
Energy-saving mode instructions.
ʠ
The display panel switches off. The appliance goes into the sleep mode after activating
Finished in option apage 5.
ʠ
The Í(Condensate container)
indicator light flashes.
Empty the condensate container apage 4.
Press the $Start/Pause button to reset the displayed
indication and then press the $Start/Pause button
again to restart the appliance if necessary.
If featured, check the hose for condensation outlet.
ʠ
p(Fluff filter/Heat exchanger)
indicator light flashes.
Clean the fluff filter apage 4.
Press the $Start/Pause button to reset the displayed
indication and then press the $Start/Pause button
again to restart the appliance if necessary.
Clean the heat exchanger a page 8.
ʠ
Dryer does not start. $Start/Pause button selected?
Door closed?
Programme set?
After-sales service
If you cannot rectify the fault yourself (e.g. switching off/on) aWhat to do if..., page 11/12,
please contact our after-sales service. We will always find an appropriate solution and avoid
unnecessary visits by engineers.
The contact details of your local after-sales service can be found in the enclosed after-sales
service directory.
– GB 0344 892 8979 (Calls charged at local or mobile rate.)
– IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
Please provide the after-sales service the product number (E no.) and the production number
(FD) of the appliance.
Product number Production number
You can find this information:
inside the door* / in the opened service flap*
and on the rear of the appliance.
*depending on the model
Trust the expertise of the manufacturer. Contact us for assistance. In this way, you can rest
assured that the repair will be carried out by trained service technicians using original spare
parts.
ʠ
a
ʠ
ʠ
ʠ
a
ʠ
ʠ
a
a
aa
a
ʠ
a
a
ʠ
a
a
a
a
a
a
a
a
a
a
a
a
a