Bosch WTH9281IL - Moisture Sensor

Cleaning and servicing en
37
4. Clean the opening with a soft,
damp cloth.
5.
Close the base unit →Page37.
Closing the base unit
Requirement:The base unit is open.
→"Opening the base unit", Page35
1. Insert the heat exchanger cover by
the handle.
2. Close the lever for the heat ex-
changer.
3. Close the maintenance flap.
15.3 Moisture sensor
The moisture sensor in this appliance
measures how damp the laundry is
during the drying cycle. The appli-
ance changes the duration of the
automatic programme depending on
the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale,
detergents and care products can
build up on the moisture sensor.
Clean the moisture sensor regularly.
ATTENTION!
Hard or rough objects may damage
the moisture sensor.
▶ Do not use hard or rough objects,
abrasive cleaning products or steel
wool for cleaning.
Note:If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
1. Open the door.