EasyManua.ls Logo

Bosch WTR85V92ES - Laundry Preparation and Loading; Preparing the Laundry; Basic Operation; Getting Started: Programmes

Bosch WTR85V92ES
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en Laundry
26
11 Laundry
11.1 Preparing the laundry
ATTENTION!
Objects remaining in the laundry may
damage the laundry and the drum.
Remove all items from any pock-
ets in your laundry before using
the appliance.
Note
The appliance and fabrics are
protected when you prepare your
laundry.
¡ Brush off sand and soil
¡ Sort the laundry according to col-
our and textiles and observe the
care labels
¡ Close all zips, Velcro fasteners,
hooks and eyes
¡ Remove curtain fittings and lead
strips
¡ Wash small or particularly delicate
items in a mesh washing bag
¡ Load the laundry unfolded into the
drum
¡ Spin the laundry before drying
operation
12 Basic operation
operation
12.1 Switching on the appli-
ance
Requirement:The appliance has
been correctly installed and connec-
ted.
→"Installation and connection",
Page12
Turn the programme selector to a
programme.
12.2 Setting a programme
1. Turn the programme selector and
set the required programme.
→"Programmes", Page22
2. If required, adjust the programme
settings.
→"Adjusting the programme set-
tings", Page26
12.3 Adjusting the pro-
gramme settings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Requirement:A programme is set.
→"Setting a programme", Page26
Adjust the programme settings.
→"Buttons", Page19
Note:The programme settings are
not saved permanently for the pro-
gramme.
12.4 Loading laundry
Note:To prevent creasing, note the
maximum load for the programmes.
→"Programmes", Page22
Requirements
¡ The laundry is prepared and sor-
ted.
→"Laundry", Page26
¡ The drum is empty.
1. Open the door.
2. Place the laundry in the drum.
3. Close the door.
Ensure that there is no laundry
trapped in the door.
12.5 Starting the programme
Requirement:A programme is set.
→"Setting a programme", Page26
Press Inicio/Pausa +Carga .

Table of Contents

Related product manuals