Refresher en
33
Cleaning the filter in the
refresher tank
The filter in the refresher tank prevents
the refresher tank from being
contaminated.
1. Pull out the condensation container
horizontally.
2. Remove the filter and clean it under
running water or in the dishwasher.
3. Reinsert the filter.
Caution!
Risk of damaging the appliance.
Only operate the appliance with the
filter inserted.
4. Push the condensation container
back into the appliance until you feel
it lock into place.
Cleaning the steam nozzle
Note: The steam nozzle can become
blocked by deposits, such as limescale
or fluff.
1. Open the door and remove the
steam nozzle cover using a
screwdriver.
2. Clean the cover under running water.
3. Push the cover in and lock it back in
place.
To Next Page
Loading...
