en Help with the appliance
38
--------
Note: If you cannot rectify the fault yourself by turning the appliance off and then on
again, please contact our after-sales service.~ Page 43
Drying programme is
stopped.
If the drying programme is stopped due to a power failure, restart the pro-
gramme or remove the laundry and spread it out.
Unusual noises when
drying.
Automatic cleaning of the heat exchanger produces noises. This does not indi-
cate that there is a malfunction on the appliance.
The appliance feels cold
despite drying.
Not a fault. The appliance can dry effectively at low temperatures using a heat
pump.
Water overflows when
the refresher tank is
filled.
The filter in the refresher tank may be blocked by deposits. Clean
the filter.~ Page 33
Residual water in the
condensation container
despite the appliance
being connected to the
drain hose*.
If the optional drain hose is installed, residual water remains in the condensa-
tion container due to the appliance's self-cleaning function.
* Depending on how the appliance is equipped or the available accessory
To Next Page
