Need help?Do you have a question about the Boschert EAGLE Series and is the answer not in the manual?
Explains the purpose of operating instructions for operators and maintenance personnel.
Details proper use of the eyebolt for safe machine transportation.
Explains warning symbols for safety, procedures, and machine damage prevention.
Covers manual location, instruction, updates, utilization, and adherence to regulations.
Addresses attire, signs, machine changes, spare parts, emergencies, and fire extinguishers.
Covers personnel selection, qualification, assignment, and electrical installations.
Focuses on machine condition, inspection, malfunctions, start-up, electrical energy, and noise.
Outlines machine principles, safety, and designated use for notching/punching.
Provides dimensional drawings for Boschert Lite and Eagle models.
Lists operating voltage, frequency, weight, capacity, etc. for Boschert Lite.
Lists technical specifications for the Boschert Eagle (LB-12).
Lists technical specs for Boschert Silver with Cope (LB-13 KE).
Discusses notching capacity limits for specific steel types and potential machine issues.
Identifies control panel elements like keys, LEDs, and the foot switch.
Explains the function of hydraulic and pneumatic keys and their indicator LEDs.
Describes the three operating modes: SET-UP, CONTINUOUS STROKE, and SINGLE STROKE.
Provides step-by-step instructions for starting the machine safely.
Details procedures for setting the cutting gap and adjusting the stroke.
Step-by-step guide for changing blades and setting clearance.
Details maintenance for guiding cylinders, including oil level checks.
Provides specifications for the oil measuring rod for guiding cylinders.
Explains hydraulic oil type, capacity, change intervals, and blade lubrication.
Step-by-step guide for changing hydraulic oil and filter.
Presents the hydraulic schematic with component labels and descriptions.
Lists manufactured parts for the Boschert Lite model with item numbers.
Lists purchased parts for the Boschert Lite model with item numbers.
Lists manufactured parts for the Boschert Eagle model with item numbers.
Lists purchased parts for the Boschert Eagle model with item numbers.
Provides a front view diagram of the Silver Eagle machine with part callouts.
Shows a cross-section view (A-B) of the machine with part callouts.
Displays a sectional view (C-D) of the machine's hydraulic components.
Illustrates the disk spring column assembly.
Details the procedure for replacing ram return springs.
Explains how to change the machine's operating voltage via jumpers and transformers.
Presents the electrical wiring diagram for the USA market with component labels.
Lists electrical components and their corresponding part numbers and functions.
Shows the ACD Tableau configuration with jumper settings for different modes.
Guidelines for storing and ordering spare parts, emphasizing original parts.
Provides contact information for Boschert Precision Machinery Inc. USA.
Detailed list of spare parts for Lite and Silver Eagle models with order numbers.
Describes the functionality and benefits of the horizontal hold-down stop bar.
Details parts and order numbers for the Boschert LITE locking bolt assembly.
Details parts and order numbers for the Boschert EAGLE locking bolt assembly.
Details parts and order numbers for the Boschert SILVER EAGLE locking bolt assembly.
Lists components for locking bolts with part numbers and quantities.
Mentions availability of inside stops, noting non-availability for Boschert Lite.
Describes the optional mini stop and its purpose of avoiding standard stop setting.
Instructions on how to lengthen/shorten downward stroke and adjust upper limit.
Shows parts list and diagrams for hold down assemblies for specific models.
Guides troubleshooting steps for a blown fuse on the circuit board.
To Next Page
General