Need help?Do you have a question about the Boschert LB-12 and is the answer not in the manual?
Explains the warning symbol used for safety-related items and the end-user's responsibility for guarding.
Requires personnel to read instructions, especially safety, before operating, setting up, or maintaining the machine.
States management's responsibility to ensure operators use the machine safely and properly.
Details procedures for reporting malfunctions and prohibits unauthorized modifications, voiding the warranty.
Describes how to cut off power in an emergency using the emergency stop or main switch.
States that only dependable personnel, meeting minimum age requirements, should operate the machine.
Requires trained/instructed personnel, defining responsibilities and supervision for trainees.
Ensures only assigned personnel work on the machine and follow safety procedures, prohibiting unauthorized changes.
Mandates that electrical work must comply with regulations and be done under licensed electrician supervision.
Requires operation only in safe conditions with all safety devices functional and available.
Mandates regular inspection for external damages and defects, reporting changes and securing the machine if needed.
Instructs immediate shutdown, lockout, and repair/replacement of malfunctioning components.
Requires checking safety covers and installations before start-up after maintenance or extended downtime.
Details safe practices for electrical work, fuse usage, inspection, and working with live parts.
Alerts users about machine ratings, tensile strength of materials, and potential piston fatigue from continuous use.
Details the function of various keys and their associated LEDs on the operator panel for machine control.
Provides a step-by-step guide for wiring, powering on, and initiating the machine's operation.
Details the process for changing blades and adjusting the blade clearance for proper operation.
Provides detailed steps for draining, cleaning, and refilling the oil tank and replacing the oil filter.
Explains the three-step process for changing the machine's voltage settings.
Troubleshooting steps for a blown fuse on the circuit board, including checking the board and proximity switches.
To Next Page
General