4
5. Baffle Removal
A. Remove 6 screws (4) that hold the baffle (6) in place. (Removing the driver is not necessary).
Stick your fingers in the baffle ports and pull the baffle carefully away from the enclosure. It may
take quite a bit of force to accomplish this task.
6. Baffle Replacement
A. Align the port side of the baffle (6) to the side of the enclosure that has the input terminals (9).
The baffle will only fit one way. Secure the baffle to the enclosure with 6 screws (4). Repeat the air
leak test.
To Next Page
Loading...
