Need help?Do you have a question about the Bose 301 Series III and is the answer not in the manual?
General| Brand | Bose |
|---|---|
| Model | 301 Series III |
| Category | Speaker System |
| Language | English |
Place speakers to allow music to flow freely, reflecting off walls for a wide stereo image.
Position speakers less than 18 inches from the rear wall and more than 18 inches from floor/ceiling.
Strip speaker wire ends (1/2 inch) and identify marked vs. plain wires before connecting.
Connect the left speaker to the amplifier's left output, matching marked wire to red (+) terminal.
Connect the right speaker to the amplifier's right output, matching marked wire to red (+) terminal.
Test speaker phasing by playing mono bass music; sound should center between speakers.
Reverse wire connections on one speaker if bass is lacking; use connection yielding most powerful bass.
Designed for amplifiers/receivers rated from 10 to 150 watts per channel; avoid distorted sound.
Wipe enclosures with a damp cloth; vacuum grille panels carefully. Refer other maintenance to service personnel.
Check amplifier/receiver controls, speaker phasing, and connections for treble/bass or defective speaker problems.
Details include Direct/Reflecting design, driver complement, impedance, power rating, dimensions, and weight.
Guidance on speaker wire gauge based on maximum length for optimal frequency response.
To Next Page
