Need help?Do you have a question about the Bose Acoustimass 3 Series III and is the answer not in the manual?
General| Configuration | 2.1 |
|---|---|
| System Components | 2 Satellite Speakers, 1 Subwoofer |
| Satellite Speakers | 2 |
| Subwoofer | 1 |
| Impedance | 4 - 8 Ohms |
| Nominal Impedance | 8 Ohms |
| Power Handling | 10-100 watts per channel |
| Recommended Amplifier Power | 10-100 watts per channel |
| Satellite Speaker Dimensions (WxHxD) | 4.5 x 6.5 x 4.5 inches |
| Frequency Response | 45Hz - 20kHz |
Fields for recording system details like serial number and purchase date.
Overview of the Bose Acoustimass system's technology and design.
Procedures for safely unpacking the speaker system and handling potential damage.
Guidelines for optimal positioning of cube speakers relative to listeners and screens.
Recommendations for bass module placement to enhance sound and avoid interference.
Instructions on identifying positive/negative wires and using appropriate cables.
Steps for wiring the cube speakers to the bass module.
Steps for wiring the bass module to the amplifier or receiver.
Verifying all audio cable connections for correct polarity and security.
Testing system operation using the amplifier's balance control.
Proper methods for cleaning speaker cabinets and grilles.
Explanation of the system's overload protection circuit.
Troubleshooting common issues by identifying potential causes and solutions.
Information on the system's limited five-year transferable warranty.
List of key features of the Bose Acoustimass-3 Series III system.
Details the specific drivers used in the bass module and cube speakers.
Specifications for compatible amplifiers and speaker impedance.
Guidance on selecting speaker wire based on length.
Physical dimensions of the system components.
Contact details for Bose customer support globally and in specific regions.
Contact information for Bose Service in the USA.
To Next Page