What to do if I hear distortion at high volume levels on my Bose 901 VI Speaker System?
If you notice distortion when the volume is high on your Bose Speaker System, attempt to lower the volume. If the distortion disappears, it might indicate that your receiver or amplifier lacks sufficient power.
How to troubleshoot a defective speaker sound or no sound in one Bose Speaker System speaker?
To troubleshoot a Bose Speaker System where one speaker sounds defective or doesn't play, turn off the amplifier and disconnect the speaker wire at the amplifier from the problematic speaker. Reconnect the wire to the other channel. If the speaker now works correctly, the issue isn't with the speaker or its wiring.
What to do if neither speaker plays on my Bose 901 VI Speaker System?
If neither speaker on your Bose Speaker System is producing sound, try connecting the speakers to another receiver or amplifier that you know is working correctly. If the speakers function properly with the alternative device, the problem isn't with the speakers themselves.
How to check if the issue is in the 901 active equalizer of my Bose 901 VI?
To determine if the problem lies within the 901 active equalizer of your Bose Speaker System, bypass the equalizer to see if the system functions correctly without it. Also, verify that all connections are properly made and that none of the cables are defective.
Why do the high and low frequencies seem weak on my Bose 901 VI?
If the high and low frequencies seem weak on your Bose Speaker System, ensure that the 901 active equalizer is properly connected in the circuit.
Essential warnings and cautions for safe system operation.
Details on compatibility with amplifiers and receivers.
Connecting the equalizer via Tape Monitor connections.
Connecting the equalizer via Pre Out/Main In for home theater systems.
Procedures to test speakers and equalizer connections for proper function.
How to play music with the system, depending on connection type.
Solutions for common problems with speakers, equalizer, and connections.
General| Type | Direct/Reflecting Speaker System |
|---|---|
| Impedance | 8 Ohms |
| Recommended Amplifier Power | 10 - 450 Watts per channel |
| Drivers | Nine 4.5" full-range drivers |
| Enclosure Type | Acoustic Suspension |
| Weight | 35 lbs each |
| Crossover | Active Equalizer included |
To Next Page
