What to do if neither Bose 901 Speaker System plays any sound?
If neither of your Bose speakers is producing sound, try connecting them to another receiver or amplifier that you know is working correctly. If the speakers then play sound, the problem isn't with the speakers themselves. Keep in mind that the tonal balance of the 901 speakers will not be correct if the 901 active equalizer is not in use with the second receiver or amplifier.
How to troubleshoot the 901 active equalizer in Bose Speaker System?
If you suspect the issue is with the 901 active equalizer in your Bose Speaker System, bypass the equalizer to see if the system works correctly without it. (Note that the speakers will not have any highs or lows.) Also, check that all connections are correct and that none of the cables are faulty.
What to do if my Bose 901 has distortion at high volume?
If you notice distortion when the volume is high on your Bose Speaker System, attempt to reduce the volume. If the distortion disappears, it could mean that your receiver or amplifier doesn't have enough power.
How to troubleshoot Bose 901 Speaker System if one speaker sounds defective?
If one of your Bose speakers sounds defective or isn't playing, don't switch the wires, as this could damage the speaker. Instead, turn off the amplifier and disconnect the wire of the speaker that is not working from the amplifier. Then, reconnect that wire to the other channel. If the speaker now works, the issue isn't with the speaker or its wiring.
Why do the high and low frequencies seem weak on my Bose 901?
If the high and low frequencies sound weak on your Bose Speaker System, make sure that the 901 active equalizer is properly connected in the circuit.
General| Brand | Bose |
|---|---|
| Model | 901 |
| Category | Speaker System |
| Language | English |
Details on the transferable warranty provided with the Bose 901 system.
Information on how to contact Bose for assistance and support.
Initial setup considerations, warnings, and unpacking instructions for the system.
Connecting with other components and overview of installation procedures.
Guidelines for choosing optimal speaker locations and support methods.
Detailed instructions for connecting speakers and the active equalizer to your receiver.
Procedures to verify functionality and integrate other audio devices.
How to operate the speakers based on connection type (Tape Monitor or Pre Amp Out).
Using tone controls (sliders/knobs) for optimal sound quality.
Compatibility with other speakers and connecting extra units.
Instructions for cleaning speakers and resolving common system issues.
Technical details, dimensions, and specifications for the system components.
To Next Page
