Bose Acoustic Wave music system II. - Installing Batteries; Using the Stand; Using the Backlight

EnglishDeutschFrançaisArabic EspañolItalianoThai NederlandsS. Chin Korean
GETTING STARTED
Thank you
Thank you for purchasing the Premium Backlit Remote for use with your Bose
®
Acoustic Wave
®
music system II. We hope it adds to your enjoyment.
Carefully unpack the carton and save the packing materials for future use.
Installing batteries
Open the battery compartment by lifting the latch as shown below. Install the two
supplied AAA (LR03) alkaline batteries, observing the + and – polarity markings in
the compartment.
+
–
Using the stand
Backlight
button
Remote
stand
Your remote fits securely in its stand.
You may operate the remote while in
the stand, without pointing it directly
at the Acoustic Wave
®
music system II.
Using the backlight
Press one or both of the backlight but-
tons to turn on the button lights for
seven seconds. To extend the lighting
for seven additional seconds, press
any button.
Please dispose of used batteries properly, following any local
regulations. Do not incinerate.
This product conforms to the EMC Directive 89/336/EEC and to the Low
Voltage Directive 73/23/EEC. The complete Declaration of Conformity can
be found on
www.bose.com/static/compliance/index.html.
01.ENG.fm Page 2 Friday, May 5, 2006 6:55 PM